RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 4657|回復: 16
收起左側

各位ching你地買咩牌子電池 和 差電器?

[複製鏈接]
sym1510 發表於 2014-1-16 18:05:17 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
各位ching你地買咩牌子電池 和 差電器?
d.s 發表於 2014-1-17 08:43:15 來自手機 | 顯示全部樓層
電池期期唔同,呢期比較爆係intellect(慢你/創傷有售)
充電器,入門級skyrc ($5xx)
 樓主| sym1510 發表於 2014-1-17 11:38:25 | 顯示全部樓層
本帖最後由 sym1510 於 2014-1-17 11:47 編輯
d.s 發表於 2014-1-17 08:43
電池期期唔同,呢期比較爆係intellect(慢你/創傷有售)
充電器,入門級skyrc ($5xx) ...

充電器要$5xx.   @@"   好貴,同鴨寮街(1舊水有找)買果d充電器有咩分別?
niwadaisuke 發表於 2014-1-17 11:48:32 | 顯示全部樓層
500嗰啲已經係比較基本,如果你唔要全新既話都有平D。我放緊2部二手MUCHMORE
 樓主| sym1510 發表於 2014-1-17 12:54:26 | 顯示全部樓層
niwadaisuke 發表於 2014-1-17 11:48
500嗰啲已經係比較基本,如果你唔要全新既話都有平D。我放緊2部二手MUCHMORE

幾錢?pm
feihung 發表於 2014-1-17 15:17:19 | 顯示全部樓層
X power Lipo and I Charger 3010B
 樓主| sym1510 發表於 2014-1-17 15:51:44 | 顯示全部樓層
本帖最後由 sym1510 於 2014-1-17 16:25 編輯
feihung 發表於 2014-1-17 15:17
X power Lipo and I Charger 3010B

CHING 好似岩大車用-..-"
kevt2005 發表於 2014-1-17 18:02:15 | 顯示全部樓層
本帖最後由 kevt2005 於 2014-1-17 18:10 編輯

I have the following Chargers
1. Powerex MH-C9000 Charger/Analyzer $4xx
2. SkyRC NC2500 Charger $4xx
3. iCharger 3010B $12xx
4. PowerLab 8 Workstation $15xx (depends on what parts do you buy)

MH-C9000 and NC2500 only charge AA and AAA batteries.  NC2500 actually can also charge any batteries via the USB port as long as the external batteries accept USB 5V charging.  These 2 chargers are pretty much the same in terms of functions and features.  One good thing about using these chargers/analyzers is that they have Break-in mode and Refresh mode.  Break-in mode is for new batteries running in.  Refresh is to re-condition batteries that have been used for a while.  NC2500 allows free Android app to fully control the charger via bluetooth.

iCharger 3010B and PowerLab 8 are both high end chargers and are for serious racers (or whoever don't care about price and just want the best of everything).  They both basically charge all types of common battery chemistry being used on the market.  PowerLab 8 can charge NiZn while 3010B cannot.  Both allow you to connect them to computer via USB and allow software control.  However, PowerLab 8 allows you to change almost every single bit of function and control via their freely download software.  Firmware update is very easy and thus whenever there is new battery chemistry, theoretically its easier to add that in via firmware or you can just add it in yourself.  The software for 3010B is basically just a monitoring software that allows you to see the charging/discharing status.  And the software/firmware being used in 3010B is a very common one being used in many different brand names of chargers that are manufactured in China.  In terms of battery charging/discharge, both chargers are pretty much the same.  However, due to the specialised software of PowerLab8, I would say it's better than 3010B because you can do fine-tuning to optimise your charging.  In addition, there are also cleverly designed features that make it the best (in my point of view) now on the market.

In your case, I would recommend you to use the NC2500.  Simple to use and cheap.  Of course, there are many cheaper charger out there you can use.  They will still work.  But they don't have conditioning function.  If you are serious in RC racing, get the better one.  If you're not sure, just use the cheap one.

Just my 2 cents.
bumper 發表於 2014-1-17 18:09:05 | 顯示全部樓層
sym1510 發表於 2014-1-17 11:38
充電器要$5xx.   @@"   好貴,同鴨寮街(1舊水有找)買果d充電器有咩分別?

嫌貴用金霸王或者鴨寮街GP電,十元八塊就玩得啦
kevt2005 發表於 2014-1-17 18:19:56 | 顯示全部樓層
For batteries, I have

1. Orion SHO NiMH 750mAh
2. ACE NiMH 800mAh
3. BPI NiZn 1000mWh (or 5xxmAh)
4. X-Power LiPo 560MAh

ACE is the best value/performance NiMH.  It does allow charging up to 800mAh.  The "O" brand does not have the claimed capacity.  BPI is also cheap, around RMB35 for 4 AAA.  But their life span is not as long as NiMH and NiZn has to use chargers that support NiZn chemistry.  Never use NiMH charger to charge NiZn.
LiPo is the most powerful battery.  X-power produces the best LiPo for Mini-Z now.  But they only fit their new MRX chassis.
 樓主| sym1510 發表於 2014-1-17 18:47:35 | 顯示全部樓層
kevt2005 發表於 2014-1-17 18:19
For batteries, I have

1. Orion SHO NiMH 750mAh

非常感謝 ching kevt2005

lawrencewong 發表於 2014-1-19 15:55:23 來自手機 | 顯示全部樓層
kevt2005 發表於 2014-1-17 18:19
For batteries, I have

1. Orion SHO NiMH 750mAh

C-hing, can mr03ve use x power lipo?
r470620 發表於 2014-1-19 16:03:23 來自手機 | 顯示全部樓層
kevt2005 發表於 2014-1-17 18:19
For batteries, I have

1. Orion SHO NiMH 750mAh

Kevt ching, what is the Voltage of the x power lipo? plz!
kevt2005 發表於 2014-1-19 21:26:39 | 顯示全部樓層
lawrencewong 發表於 2014-1-19 15:55
C-hing, can mr03ve use x power lipo?

Yes, X-power LiPo can be used in MR03VE-converted MRX.  To use them in stock MR03VE, you have to do some modifications on the chassis.

http://www.x-powerrc.com/product_detail.php?id=562


kevt2005 發表於 2014-1-19 21:27:20 | 顯示全部樓層
r470620 發表於 2014-1-19 16:03
Kevt ching, what is the Voltage of the x power lipo? plz!

3.7V

http://www.x-powerrc.com/product_detail.php?id=560



r470620 發表於 2014-1-20 20:32:48 來自手機 | 顯示全部樓層
kevt2005 發表於 2014-1-19 21:27
3.7V

http://www.x-powerrc.com/product_detail.php?id=560

thank you. 咁請問x power這電, 係2粒3.7v係串聯成7.4v用, 定3.7v並聯增大mah咁用?
kevt2005 發表於 2014-1-20 23:10:47 | 顯示全部樓層
係串聯成7.4v用
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 03:12 , Processed in 0.077798 second(s), 20 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表