GTR (Part 2 - matte black)

登錄/註冊後可看大圖

C Hing, PS ? no.

albertau2011 發表於 2013-6-14 15:13

                               
登錄/註冊後可看大圖

C Hing, PS ? no.

The coating underneath the shell is normal Tamiya black (not matte black).

The coating on top of the shell is transparent matte colour also by Tamiya.

Sorry, I can't remember the numbers.

But the shops at KWS will be able to help you.

good~

Partvery nice

Yiu.N 發表於 2013-6-14 22:57
Partvery nice

Thanks, make part 3 later

期待part III

即係底面都要噴

咁噴面時，車窗車燈位使唔使做返protection 呀？thx!

whatafather 發表於 2013-6-16 23:17
即係底面都要噴

咁噴面時，車窗車燈位使唔使做返protection 呀？thx!

Yes, need to cover the windows and lights with tape before spraying the outer shell.

小弟第一次玩車，架TT01ED都噴咗同c hing一樣既殼加LED燈
希望各位c hing比d意見~~~

鋼琴黑又另一味道

Alanw C hing - VERY NICE !!!!!!!!!!!!!!!!!!!!!!

Like.......!

Alanw 發表於 2013-6-25 20:16

                               
登錄/註冊後可看大圖

小弟第一次玩車，架TT01ED都噴咗同c hing一樣既殼加LED燈
希望各位c hing比d意見~~~ ...

Like.......!

Alanw 發表於 2013-6-25 20:16

                               
登錄/註冊後可看大圖

小弟第一次玩車，架TT01ED都噴咗同c hing一樣既殼加LED燈
希望各位c hing比d意見~~~ ...

d 殻柱好似長咗d，定係有心整咁長。

本身car kit 已經係咁長，其實我都想換套短D既殼柱~~~
各位 c hing有咩好介紹同可入係邊度入貨!!! Thanks

Alanw 發表於 2013-6-27 10:16

                               
登錄/註冊後可看大圖

本身car kit 已經係咁長，其實我都想換套短D既殼柱~~~
各位 c hing有咩好介紹同可入係邊度入貨!!! Thanks ...

Just cut it shorter....

But careful not to cut it too short (otherwise may not fit other shells)