RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2766|回復: 9
打印 上一主題 下一主題
收起左側

My new X12Link

[複製鏈接]
跳轉到指定樓層
1#
ernestf 發表於 2011-12-1 17:08:27 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Ready to go this weekend !

http://ernrc.blogspot.com/2011/11/xray-x12link.html
2#
tiger1 發表於 2011-12-1 20:55:21 | 只看該作者
I love that car, looks great!!
3#
tiger1 發表於 2011-12-1 20:56:12 | 只看該作者
Please keep the blog going
4#
tekin708 發表於 2011-12-1 21:43:13 | 只看該作者
good car...
5#
Edwin 發表於 2011-12-2 16:17:16 | 只看該作者
Oh................I only run my X11 once, now new model come...................
6#
nt12011 發表於 2011-12-2 23:44:38 | 只看該作者
7#
 樓主| ernestf 發表於 2011-12-3 17:35:32 | 只看該作者
Thanks for comments.
Tested run today, felt more stable than the old XII Link but not as good as my Yokomo R12 out of the box. Need a bit more setup changes to improve in-field handling.
Initial setup as follow for reference :
ESC - HobbyWing v2.1 120a 1S, latest mod firmware, DDRS 6, boost 12, turbo to the max.
Motor - LRP x12 6.5 octa wind
Speedmind 35F / 30R, rollout around 41.2mm (27/96T)
Ride height - F 4 / R 4.2mm
Shock - Yokomo 550wt
Tubes - Kyosho 30,000 oil
Rear down stop at 2mm
Other setting are following build manual.
8#
sepsep 發表於 2011-12-3 22:48:51 | 只看該作者
回復 ernestf 的帖子

wow thx for sharing, really quite good for tuning recipe!!

"Rear down stop at 2mm" is it x12 factory default? i remember old-skool using 1mm only.
9#
kclam 發表於 2011-12-9 22:37:50 | 只看該作者
10#
 樓主| ernestf 發表於 2011-12-10 19:22:06 | 只看該作者
回復 sepsep 的帖子

I ran my previous XII link and settled at 2mm rear down stop, so I started at 2mm with x12 link.
Tested again today with Speedmind F 35 and Xceed rear soft, I can reduce to 1mm down stop. Happy testing today.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-29 04:37 , Processed in 0.031376 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表