Cut crankshaft

What kind of saw should I use to cut short the crankshaft?  I bought a cheap saw but didn't work.  Please help.

點解要cut?

用d 貴野. .such as 占毛!!!

原帖由 andrewlio 於 2006-7-26 00:02 發表
用d 貴野. .such as 占毛!!!

jam帽 cut唔cut到呀?i've use磨機 or cut機 before

原帖由 devilstar 於 2006-7-26 00:12 發表

jam帽 cut唔cut到呀?i've use磨機 or cut機 before

占毛.. 梗係cut 到啦..

cut 咩都得ar... 刻個名上去都得啦!


但係都係磨機好d.. 簡單又直接!

I don't have a 磨機.  Do I go to the hardware store to ask for 占毛 and they will know?

原帖由 diablo 於 2006-7-26 13:47 發表
I don't have a 磨機.  Do I go to the hardware store to ask for 占毛 and they will know?

shamshuipo la......a chinese made dremel is about HKD200......great performance
but if you want to CUT crankshaft.........dremel would be hard to use.

原帖由 雷公 於 2006-7-26 13:49 發表

shamshuipo la......a chinese made dremel is about HKD200......great performance
but if you want to CUT crankshaft.........dremel would be hard to use.

老反占毛？？
２舊水．．　唔係ｍａ．．．．．．．

brother 雷公, what do you suggest to cut crankshaft then?

原帖由 andrewlio 於 2006-7-26 14:26 發表

老反占毛？？
２舊水．．　唔係ｍａ．．．．．．．

太貴定太平﹖
基本上正版DREMEL都係中國制造﹐有一隻老翻直頭同美國果隻一模一樣﹐我懷疑係老鼠貨﹐我就係買左果隻﹐D散氣孔同開關制都一模一樣﹐上次磨個MANIFOLD口﹐開“中細”火都做到﹐好夠力。

原帖由 雷公 於 2006-7-26 17:34 發表

太貴定太平﹖
基本上正版DREMEL都係中國制造﹐有一隻老翻直頭同美國果隻一模一樣﹐我懷疑係老鼠貨﹐我就係買左果隻﹐D散氣孔同開關制都一模一樣﹐上次磨個MANIFOLD口﹐開“中細”火都做到﹐好夠力。

係平到笑...

如果夠力ge 話就ok.. 不過耐唔耐用先?

原帖由 diablo 於 2006-7-26 15:38 發表
brother 雷公, what do you suggest to cut crankshaft then?

use chainsaw la....just kidding
i don't know, i hav no experience. i guess you can still make a rough cut on the crankshaft first and then use a dremel to grind it down. be sure to wear safety goggles though.
i dont know how you guys do it, but for me, i always make the parts wet when i dremel. in this way, it's easier for me to see the parts that i grind on.

原帖由 andrewlio 於 2006-7-26 17:35 發表

係平到笑...

如果夠力ge 話就ok.. 不過耐唔耐用先?

OK啦﹐用過5-6次仲未死﹐好新淨﹐鋼又試過﹐炭籤又試過﹐膠既當然都試過啦﹐真係好抵玩
正版賣600-700

原帖由 雷公 於 2006-7-26 17:34 發表

太貴定太平﹖
基本上正版DREMEL都係中國制造﹐有一隻老翻直頭同美國果隻一模一樣﹐我懷疑係老鼠貨﹐我就係買左果隻﹐D散氣孔同開關制都一模一樣﹐上次磨個MANIFOLD口﹐開“中細”火都做到﹐好夠力。

我諗應該唔係假就老鼠貨,
就算手提既都唔得la....
過你買到平野我都鄧你開心~~!

原帖由 雷公 於 2006-7-26 17:42 發表

OK啦﹐用過5-6次仲未死﹐好新淨﹐鋼又試過﹐炭籤又試過﹐膠既當然都試過啦﹐真係好抵玩
正版賣600-700

邊度買嫁？

原帖由 無限mtx-3 於 2006-7-26 18:36 發表


邊度買嫁？

鴨記有, 我都用幾年, 街邊當, 我覺係老鼠貨

原帖由 coronafans 於 2006-7-26 18:46 發表


鴨記有, 我都用幾年, 街邊當, 我覺係老鼠貨

邊度有得賣…

原帖由 無限mtx-3 於 2006-7-26 21:08 發表


邊度有得賣…

咪鴨寮街!!!