RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2794|回復: 17
收起左側

new machine

[複製鏈接]
jling 發表於 2010-2-13 00:22:37 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
will be very busy now.
P1120674a.JPG
German 發表於 2010-2-13 00:30:53 | 顯示全部樓層
有得租用就正囉
truckman 發表於 2010-2-13 00:34:23 | 顯示全部樓層
console001 發表於 2010-2-13 00:47:08 | 顯示全部樓層
正woh....
定係 Made in Germany 呢.....?
(我都想知幾$呀... )
pd 發表於 2010-2-13 01:05:07 | 顯示全部樓層
Proxxon 好!!!
samy 發表於 2010-2-13 01:11:53 | 顯示全部樓層
you are so crazy, my pal. when you have time to help me to set-up the wireless router?
ilove-benz 發表於 2010-2-13 01:34:24 | 顯示全部樓層
$6000 ?
奸仔 發表於 2010-2-13 02:02:38 | 顯示全部樓層
得Z軸有servo?
Tommy_Boy 發表於 2010-2-13 04:27:47 | 顯示全部樓層
嘩.....
 樓主| jling 發表於 2010-2-13 10:59:37 | 顯示全部樓層
It is from Germany. It has three axis stepping motors and also provide turning knods on the other side as a mill.

But actually, it is very small size so it cannot do heavy duty milling.
samchong 發表於 2010-2-13 11:08:14 | 顯示全部樓層
With all these toys, I think soon or later you can make your robot fly~
奸仔 發表於 2010-2-17 12:24:05 | 顯示全部樓層
It is from Germany. It has three axis stepping motors and also provide turning knods on the other side as a mill.

But actually, it is very small size so it cannot do heavy duty milling.:lovelin ...
jling 發表於 2010-2-13 10:59

How much is it and where did you get this?
mmsrontam 發表於 2010-2-21 17:14:17 | 顯示全部樓層
I want to use it .
Can I?
 樓主| jling 發表於 2010-2-23 01:40:24 | 顯示全部樓層
13# 奸仔

I ordered it from Germany online shop. There are a few brands which modifies Proxxon &  Sherline machine. check this out in www.usovo.de
 樓主| jling 發表於 2010-2-23 01:51:28 | 顯示全部樓層
I want to use it .
Can I?
mmsrontam 發表於 2010-2-21 17:14


See how you to want to build you crane model
It is working now!!!

                               
登錄/註冊後可看大圖
奸仔 發表於 2010-2-23 09:22:05 | 顯示全部樓層
13# 奸仔

I ordered it from Germany online shop. There are a few brands which modifies Proxxon &  Sherline machine. check this out in www.usovo.de
jling 發表於 2010-2-23 01:40

Sherline isn't good enough?
 樓主| jling 發表於 2010-2-23 14:40:08 | 顯示全部樓層
17# 奸仔

For the same price, I think I can only get a nice Mill not CNC
奸仔 發表於 2010-2-23 19:07:02 | 顯示全部樓層
18# jling

10K for a CNC mill, quite good price!
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 21:02 , Processed in 0.186865 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表