RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2272|回復: 7
打印 上一主題 下一主題
收起左側

想問有玩tamiya Pajero cc-01既師兄們

[複製鏈接]
跳轉到指定樓層
1#
yuch 發表於 2006-7-3 21:10:43 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
雙星或其他生產商有冇出cc-01既改裝parts ?

又或者雙星其他型號既 rc car 有冇parts 係可以同cc-01共用?

我好似從未見過有,有玩 cc-01既師兄可以提供一下資料嗎?

thank you so much ~
2#
雷公 發表於 2006-7-3 21:41:31 | 只看該作者
is cc-01 the same as cross country (xc)?
if this is so, there is a 'low ride conversion kit' from tamiya that's designed for cc-01
3#
 樓主| yuch 發表於 2006-7-3 21:55:04 | 只看該作者

回復 #2 雷公 的帖子

i c

咁有冇例如搖手臂呀、c座呀、團向杯呀................D parts ?
4#
mikewu 發表於 2006-7-4 09:16:33 | 只看該作者
原帖由 雷公 於 2006-7-3 21:41 發表
is cc-01 the same as cross country (xc)?
if this is so, there is a 'low ride conversion kit' from tamiya that's designed for cc-01


Yes, CC01 = XC
And the low rider conversion kit is not availiable in the market anymore but you might sometimes found them for about $200 for a set.  
The MU on the right is equipped with low rider conversion kit....
5#
mikewu 發表於 2006-7-4 09:18:35 | 只看該作者
原帖由 yuch 於 2006-7-3 21:55 發表
i c

咁有冇例如搖手臂呀、c座呀、團向杯呀................D parts ?


I don't think there are any of the above parts available in the market anymore...  
As far as I know, the "steering knuckle" is the same as TA01/02 so if you find any metal for the TA cars, it should fit but remember, CC01 uses differnt sizes bearings on the knuckles.
6#
liallanhk 發表於 2006-7-4 09:34:26 | 只看該作者
嘩!車好靚wo! CRV呀!I love it......
7#
Jackson 發表於 2006-7-4 10:23:09 | 只看該作者
The lowrider conversion is available at Stellamodels. I am pretty sure they are located in Hong Kong, but only have online store.

http://www.stellamodels.net/cata ... mp;products_id=1161
8#
 樓主| yuch 發表於 2006-7-4 11:32:06 | 只看該作者
咁該晒大家...........................
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-28 02:25 , Processed in 0.112685 second(s), 18 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表