RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2494|回復: 11
打印 上一主題 下一主題
收起左側

CC01+HPI 200mm Cayenne?

[複製鏈接]
跳轉到指定樓層
1#
speedstar 發表於 2006-6-14 00:05:54 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
http://bbs.rc-evo.com/viewthread ... =porsche&page=1

唔知個HPI Cayenne 殼 fit 唔 fit 到 CC01 車身呢?
2#
雷公 發表於 2006-6-14 00:12:48 | 只看該作者
just check the wheel base first, it's 259mm
3#
minimini 發表於 2006-6-14 00:14:09 | 只看該作者
原帖由 雷公 於 2006-6-14 00:12 發表
just check the wheel base first, it's 259mm


259mm is the WB of CC01 chassis or the Cayenne shell ??
4#
雷公 發表於 2006-6-14 00:16:40 | 只看該作者
原帖由 minimini 於 2006-6-14 00:14 發表


259mm is the WB of CC01 chassis or the Cayenne shell ??

that's for Cayenne shell, i bought mine two weeks ago for my tg10r and it's now in progress, very nice shell
5#
crazyed30000 發表於 2006-6-14 06:33:34 | 只看該作者
Hello Mr.雷公 ,
Which shop you bought the HPI Cayenne body from ?
Because i looking for a HPI Cayenne body .
But i don't know where have it for sell . Thanks a lot.
6#
雷公 發表於 2006-6-14 07:47:23 | 只看該作者
原帖由 crazyed30000 於 2006-6-14 06:33 發表
Hello Mr.雷公 ,
Which shop you bought the HPI Cayenne body from ?
Because i looking for a HPI Cayenne body .
But i don't know where have it for sell . Thanks a lot.

http://bbs.rc-evo.com/viewthread ... mp;extra=#pid114911
7#
crazyed30000 發表於 2006-6-14 10:55:48 | 只看該作者
thanks
8#
mikewu 發表於 2006-6-14 10:58:33 | 只看該作者
原帖由 speedstar 於 2006-6-14 00:05 發表
http://bbs.rc-evo.com/viewthread ... =porsche&page=1

唔知個HPI Cayenne 殼 fit 唔 fit 到 CC01 車身呢?


hmm......  I have my double.....
I have a Savage at home and I tried to put the Savage body on CC01 but it is way too big.  As far as I know, the Porsche cover is built for Savage so I suppose it they would not fit....
But you can try Hummer 190mm cover on CC01 and I heard it fits perfect......
9#
python 發表於 2006-6-14 16:30:16 | 只看該作者
Why don't u use a 4 wheel independent suspension chassis? coz cayenne is not rear regid axle suspension.
10#
 樓主| speedstar 發表於 2006-6-14 21:19:09 | 只看該作者
原帖由 mikewu 於 2006-6-14 10:58 發表


hmm......  I have my double.....
I have a Savage at home and I tried to put the Savage body on CC01 but it is way too big.  As far as I know, the Porsche cover is built for Savage so I suppose ...



Mikewu hing, thanks for advice. But Hummer 190mm is out of stock for long time
11#
mikewu 發表於 2006-6-15 01:23:30 | 只看該作者
原帖由 speedstar 於 2006-6-14 21:19 發表



Mikewu hing, thanks for advice. But Hummer 190mm is out of stock for long time


They were a bunch availiable in Hung Sing and RC Model about 2 months ago... I bought 2 at the same time..  Keep checking man.. I am sure they will be back in stock again..!
Or, try this place...  www.rcxshop.com
They are actually locate in HK, but they don't do walk-ins so you have to order online..
Good luck buddy!
12#
crazyed30000 發表於 2006-6-18 22:41:41 | 只看該作者
Today i go to KWS to find the HPI Cayenne body shell.
But i don't found it.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-4-30 00:57 , Processed in 0.040717 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表