RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1383|回復: 3
收起左側

3R Clutch Installation

[複製鏈接]
st_kuen 發表於 2009-6-15 14:07:31 | 顯示全部樓層 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
C-hings,

Questions for 3R Clutch Installation:

1) How to screw in the highlighted bolt tightly on the engine shaft?
    The shaft is rotated at the same time when I screw in the bolt!
    resulting a gap between the bolt and flywheel, and flywheel can't held firmly with the engine shaft.
Should I add rings to fill the gap?

2) Must the flywheel held firmly with the engine shaft?

Thank in advance.
Clutch.jpg
l3en668 發表於 2009-6-15 14:14:29 | 顯示全部樓層
要141果粒野 卡得死270果件 先可以收緊137
 樓主| st_kuen 發表於 2009-6-15 14:22:33 | 顯示全部樓層
本帖最後由 st_kuen 於 2009-6-15 14:24 編輯


Thanks!l3en668 c-hing,

However, how to '141果粒野 卡得死270果件'?
Just press the 270 toward the engine side?
dicksonlai 發表於 2009-6-15 17:56:56 | 顯示全部樓層
[img]http://edsracingproducts.com/shared/viewProductImage.html?

                               
登錄/註冊後可看大圖
[/img][img]http://edsracingproducts.com/shared/viewProductImage.html?

                               
登錄/註冊後可看大圖
[/img]

用呢兩件野裝Cluth 會簡單好多
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-3-29 16:28 , Processed in 0.103332 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表