要洗甩個殼d油, 用開油水得唔得 ?

話說聖誕飛街抄大車, 幸好個殼冇爆冇爛, 不個d油一忽忽咁甩左出黎

我想洗甩晒d油重新噴過, (之前用双星油噴), 咁我應該買咩洗油水先可以洗清d油架 ?

有咩step要注意架 ?

用郡仕隻開油水都得(油牲用圓形樽)....不過好難洗得好...重有要洗好耐.....買過算啦
用化妝棉洗效果好d...一忽忽甩出黎可能你噴太厚...

原帖由 pantherjovi 於 2006-1-9 15:20 發表
用郡仕隻開油水都得(油牲用圓形樽)....不過好難洗得好...重有要洗好耐.....買過算啦
用化妝棉洗效果好d...一忽忽甩出黎可能你噴太厚...

agree!! time is money ma!!
and also it's extremely difficult to do with.....very hard to make it 100% clear(even 80% clear is also very difficult).....if it's not 100% clean up.....the outcome will be not good...so....just mask the window & retouch the tear-off parts with the original color la, it may be better......
to aviod the paint tear-off,must clean the body shell with detergent B4 doing paint job.HEHE!!

睇黎都唔易攪咁喎, 不過我隻AE86殼落地 2 次就要收當又唔捨得
咁双星D模型噴油應該用水性 定 油定既開油水去洗架 ?


咁易甩油唔知關唔關上次同時用左2隻油 , RACING WHITE (買錯) + PURE WHITE
我先噴PURE WHITE, 之後再噴RACING WHITE 打底 (因為RACING WHITE 好似啖奶咁色, 唔係純白, 只有用黎打底)

原帖由 Ryu 於 2006-1-9 15:56 發表
睇黎都唔易攪咁喎, 不過我隻AE86殼落地 2 次就要收當又唔捨得
咁雙星D模型噴油應該用水性 定 油定既開油水去洗架 ?


咁易甩油唔知關唔關上次同時用左2隻油 , RACING WHITE (買錯) + PURE WHITE
我先噴 ...

are those the tamiya PS series spray paint???

the problem is actaully not related to the number of paint u used....i guess it just related to....u clean the body B4 or not ....and are they the PS paint!!!???

sorry!!is it the lexan body shell???or the hard body shell??

原帖由 monkichi0210 於 2006-1-9 16:13 發表
sorry!!is it the lexan body shell???or the hard body shell??

係 双星 PS 油
我隻咪係 1/10 殼囉...........好軟身既 SPEEDWAYPAL

上次噴前已經洗左殼, 可能洗得唔夠淨喇

anyway, just spray it again with the original color la!!!!good luck!!
dun waste the time on cleaning ma!!!