960車胎厚度

960車胎厚度
請問各位師兄，一般(前、後)車胎磨到幾mm較為合適呢 ?

總之頭細尾大,相差6至7mm 真徑就OK,一般開始就 75 R   69 F

Thks..

always use 35 shore for both F & R?

or sometimes use 37...?

原帖由 swswsw 於 2009-2-28 10:17 發表

                               
登錄/註冊後可看大圖

Thks..

always use 35 shore for both F & R?

or sometimes use 37...?

If ACO, both F&R using 35

thks...

another question about chambers

Now I set R: -2 deg ; F: -1.5 deg ( Toe-in: R: 3 deg ; F: 0.5 deg )

Both R & F wear a bit inside conical....

So need to reduce a bit? let say R: -1.5 deg ; F: -1.0 deg

Any brothers can provide the setting for my reference?

Front Tire Wear

登錄/註冊後可看大圖

呢架好似行EP黎wor,幾時出車,有冇報告，
另外，其實chamber問題,好講架車表現，如你幅圖，我個人意見可減D,不過最好就糸落地試啦。