用B6差NiMH電問題~

小弟有幾粒白色SANYO白色1900mAH既電芯,
想問下各位師兄如果用B6差電機差佢地應該用咩seting?
因為我試過用1A差,大約半小時佢地就叉完而且會超熱!
所以想向各位請教一下,謝謝!

正常因為快差一定會發熱

回復 dsds 的帖子

加風扇吹

但係差完又好快用完，有冇得正常差？

用探温線一起差，過熱時自動降低電流差。
不過我都祇用0.4A電流差。

回復 TigerI2010 的帖子

所有電太大a數差排電會短命

回復 TigerI2010 的帖子

經常高a數差死得仲快

Ching, if you set charging current of 1a for a 1900 battery, charging period shall be at least 1.9 hours. Complete charging for less than this showing there must be some problems in your battery such as it has not been properly discharged before being charged. May I ask you what is the designated voltage of your battery and the charging voltage shown in the b6 when charging is nearly completed.