r22 換槳後 飛唔定, 點搞?

sure 沒有換錯A, B 槳,
但升空後架機好震, 同不停左右搖擺~
有咩可以tune?

可能 直sub 彎左

槳夾 鬆緊有冇關係?
咩叫 "直sub" ?

有..唔好太緊,直sub=主軸

平衡干舊銅可能唔見左,亦可能放得不平衡

主軸應該沒有彎, 我試過拆掉A, B 槳, 再試轉.. 主軸連轉時沒有移位~

你tune 下 4in1 果舊野...proportion ..beside that one...

槳夾要少少緊.........不過都可以移得郁
另外要check有冇重槳.....因為pitch一定唔同哂
flybar要直及左右平衡
最後先set 4合1個proportion

槳旋轉時一定要水平, 說明書有教你扭隻槳

調教後應該會有改善

Did you calibrate your A,B blades??  They should balanced!  So, you should balance them before you install into the head.

Don't do and change any other things first, it will make your problem more complicated!  Balancing your blades first! (A1=A2  and B1=B2)  
Keep a problem seperated is the most important step in setup a heli.

扭.........死硬

扭......未死.....亦唔會死