RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 1388|回復: 2
打印 上一主題 下一主題
收起左側

Associated exotek racing TC5X

[複製鏈接]
跳轉到指定樓層
1#
micky 發表於 2009-7-1 10:40:59 | 只看該作者 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Exotek Racing TC5X



                               
登錄/註冊後可看大圖

Exotek Racing 推出让Team Associated TC5电房可使用锂电的升级套件,名为  TC5X。这个产品并非一辆遥控车或电房车架,而是一组套件,玩家必须拥有ASSOCIATED TC5, TC5R OR TC5F电动房车后才可使用该产品,达到让TC5可使用锂电的目的
High performance multi adjustment lipo chassis for uncompromising balanced lipo performance. With the unique cnc manufactured stainless steel weights your lipo battery can be positioned to have equal left and right balance within grams without the need to add lead weight and without raising the battery up higher.
  • The TC5X chassis is designed and tested to equalize lateral flex. No more inconsistent flex problems caused by 6 large battery cut out like in the stock chassis. The net result is much more predictable handling.
  • 3 side ways battery mounting positions.
  • 2 front or back battery mounting positions.
  • 2 piece battery weights insures the chassis cannot be tweaked.
  • 100% American made quasi weave 2mm thick carbon fiber.
  • Narrowed chassis (100mm wide) for less chassis scrub through corners for better corner speed.
  • Includes special battery strapping tape tabs.
  • Accepts 7.4 volt flat bottom cased lipos such as Thunder Power 5200, Orion Platinum Series or similar sized lipo batteries.
  • Servo mounting is moved forward a few mm for extra room for other electronics.
  • Extra cut outs in the rear to help generate more traction for rubber tires.
  • Multi adjusting center battery rail to make sure your battery sits snugly in place.






TC5X EXTRA FLEX TOP PLATE
Designed and tested to improve overall rubber tire grip. The longer center cut provides more flex to the rear of the chassis. Non countersunk holes also provides better machined tolerance then the stock plate and more force to lock in the included button head screws to reduce tweaking. 2mm thick American made quasi weave carbon fiber.


TC5X CARBON BATTERY STRAP
If you hate tape then this is the strap for you! Custom fit for the TC5X chassis. Adds extra weight to the battery side as well thanks to the stainless steel posts. Use the supplied shims under each post to match the correct height of your battery to avoid tweaking the chassis.
2mm thick American made quasi weave carbon fiber.

2#
极限模型 發表於 2009-7-1 17:08:39 | 只看該作者
哦  原来只是套件·············
3#
极限模型 發表於 2009-7-1 17:08:53 | 只看該作者
不过真的很喜欢这个设计
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2025-5-4 22:00 , Processed in 0.045480 second(s), 15 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表