RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 6836|回復: 47
打印 上一主題 下一主題
收起左側

Another XC Restoration Project (MU)

[複製鏈接]
跳轉到指定樓層
1#
mikewu 發表於 2006-3-20 11:58:11 | 只看該作者 回帖獎勵 |正序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
Ok people.......
After the Pajero, I am so "wired" to CC01 (XC) cars and can't resist to find another one.  I am in the market for either the CRV or MU and yesterday, my friend founded an MU and ask me to have a look.
So..... it was around 11:00 pm last night... went over and take a look...  it was kinda dark but I was able to tell a few things wrong with it....   the body is pretty shot (but no cracks), the rear glass is, sort of like melted which is very hard to find piece, the side mirrors are missing, the chrome is dirty..........  etc.  But as I looking at the whole thing, I feel like there is something wrong with this whole car!  But I didn't care, I want a MU!!  So I took it home.
When I got home, HOLY SHXT, the chassis is..... is..... Melted!  The whole thing is bent!  This is worse than the Pajero!  There were rust all over the place...... the gears has absolutely no grease what-so-ever.........  And I am thinking to myself, should I start or should I not.......  
But I DID!  Can't believe I am saying this but I am going to restore this MU......  First parts gathering, I think all I really need is the rear glass.  With the help of Brother J, he find one in UK but we are waiting for the seller's response at the moment.  Chassis, I do have an extra at home I can use.  I also need new tires as the ones are cracked.  I think I can find them in Chong Sing......
I am going to clean the parts to night and give you guys an update later!
Enjoy the photos!  

[ 本帖最後由 mikewu 於 2006-3-20 12:12 編輯 ]
48#
 樓主| mikewu 發表於 2006-5-21 22:00:44 | 只看該作者
原帖由 peter7 於 2006-5-20 18:49 發表
What happen to the CRV rear window?


Don't worry, it just at the middle of the restoration process... all necessary parts are there........  
47#
peter7 發表於 2006-5-20 18:49:54 | 只看該作者
What happen to the CRV rear window?
46#
 樓主| mikewu 發表於 2006-5-20 09:28:51 | 只看該作者
45#
 樓主| mikewu 發表於 2006-5-20 09:28:14 | 只看該作者
Well, a little update on the MU.....  
The MU has been painted in baby blue and installed lowering kit.  Here is a picture of "some" of my CC01 collections... the CRV is going to be the next project.....
What I don't have in photos here:

1) NIB Jeep cover with wheels
2) NIB VW
3) NIB Pajero cover

CC01 drugs are very addicting, guys, becareful!!  

P.S. I even have the "Make in China" Land Rover Defender cover too.........  
44#
J 發表於 2006-4-3 17:29:15 | 只看該作者
i feel sorry for u mate...
43#
 樓主| mikewu 發表於 2006-4-3 17:27:37 | 只看該作者
原帖由 有勇冇謀 於 2006-4-3 17:22 發表

OH....功虧一簣


Yup.. that's why it has become a lowering MU instead of the Type X..............  
42#
有勇冇謀 發表於 2006-4-3 17:22:20 | 只看該作者
原帖由 mikewu 於 2006-4-3 17:15 發表
Well.... about the original wheels... I used hot water, which the "crap" didn't come off but instead bent the rim of the wheel....
Then I use nail polish to take the chrome off, there we ...

OH....功虧一簣
41#
 樓主| mikewu 發表於 2006-4-3 17:17:13 | 只看該作者
40#
 樓主| mikewu 發表於 2006-4-3 17:15:49 | 只看該作者
Well.... about the original wheels... I used hot water, which the "crap" didn't come off but instead bent the rim of the wheel....
Then I use nail polish to take the chrome off, there were finger prints all over the rim becasue I squeeze them too hard so the wheels are ------- Failure......
39#
J 發表於 2006-4-3 16:56:15 | 只看該作者
yes ar...we tend to pay attention to those useless details and make the restoration more difficult
38#
monkichi0210 發表於 2006-4-3 16:52:57 | 只看該作者
原帖由 J 於 2006-4-3 13:59 發表
the tyres... are the "goodyear" type not those from pajero MTW, i think they re much harder to source.


really??i dun know it's supposed to be different........thx for let me know...hehehe.......
37#
J 發表於 2006-4-3 13:59:27 | 只看該作者
the tyres... are the "goodyear" type not those from pajero MTW, i think they re much harder to source.
36#
monkichi0210 發表於 2006-4-3 13:45:09 | 只看該作者
原帖由 mikewu 於 2006-4-3 12:39 發表


Yes... I have need constantly looking on Ebay US, UK and Tamiya Club..... so far I had one chance but it was sold before I can make my offer.....  
I also would like a set of original offro ...


for the tyres ......u may find in KWS......but for the rims....those u 've got are too bad to restore ma????last time u said u wanna take the chrome off and spray them again.....it's doesn't work?????
35#
J 發表於 2006-4-3 12:54:39 | 只看該作者
原帖由 monkichi0210 於 2006-4-3 12:34 發表
mike,

u may find the rear window parts from ebay....i've seen it in ebay uk b4.......


we've been keeping our watchful eyes on the bay but still no luck.... how shxt!
34#
 樓主| mikewu 發表於 2006-4-3 12:39:42 | 只看該作者
原帖由 monkichi0210 於 2006-4-3 12:34 發表
mike,

u may find the rear window parts from ebay....i've seen it in ebay uk b4.......


Yes... I have need constantly looking on Ebay US, UK and Tamiya Club..... so far I had one chance but it was sold before I can make my offer.....  
I also would like a set of original offroad wheels instead of using the lowering kit wheels.....
33#
monkichi0210 發表於 2006-4-3 12:34:24 | 只看該作者
mike,

u may find the rear window parts from ebay....i've seen it in ebay uk b4.......
32#
 樓主| mikewu 發表於 2006-4-3 12:08:13 | 只看該作者
原帖由 python 於 2006-4-3 11:55 發表
If I were u, I would cut a piece of leather to make another soft top to replace the rear window. build a roll cage to support the soft top. just a suggestion.


Yes yes yes...  in fact, this is exactly what I have in mind..... need to go get some canvas material........  
31#
python 發表於 2006-4-3 11:55:27 | 只看該作者
If I were u, I would cut a piece of leather to make another soft top to replace the rear window. build a roll cage to support the soft top. just a suggestion.
30#
J 發表於 2006-4-3 11:30:51 | 只看該作者
lowrider pickup MU la! it's the way the go...
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2025-6-19 21:34 , Processed in 0.170432 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表