Swashplate Balancer.....

is it a must for small EP heli ??
easy to use ? thanks....

用眼睇水平都ok


要用佢既話成份頭拆散晒都幾煩

冇錯呀.........用眼睇已足夠，用呢件嘢只會玩死自己(唔實際)！hold起上o黎係用手指平衡...加上有風！度到幾平衡都咪又要用手指平衡番，仲有隻機如果穿西裝仲會難hold d o忝！以上意見只供參考

用眼睇水平都ok for small helicopter like EP200,400,450,500 and some cheap 50 nitro size

If you fly with a pro type 3D or 3C you must setup with alot of tool's to make your heli in best balance



[ 本帖最後由 ka-man 於 2008-7-29 13:04 編輯 ]

Only the cooling fan assembly is not much people in hk can done it well !!!!!!

原帖由 Han 於 2008-7-29 11:51 發表

                               
登錄/註冊後可看大圖

冇錯呀.........用眼睇已足夠，用呢件嘢只會玩死自己(唔實際)！hold起上o黎係用手指平衡...加上有風！度到幾平衡都咪又要用手指平衡番，仲有隻機如果穿西裝仲會難hold d o忝！以上意見只供參考

"穿西裝" is scale body, right ?

原帖由 ka-man 於 2008-7-29 12:58 發表

                               
登錄/註冊後可看大圖

用眼睇水平都ok for small helicopter like EP200,400,450,500 and some cheap 50 nitro size

If you fly with a pro type 3D or 3C you must setup with alot of tool's to make your heli in best balance

; ...

唔係吖！人o地''Alan & Lukas Riva 都唔洗用呢件嘢！3c機手例外

yes.......

要用佢既話成份頭拆散晒都幾煩..係煩d..但我用過..之後都吾係100%準..比眼睇好d...

原帖由 Han 於 2008-7-29 14:21 發表

                               
登錄/註冊後可看大圖

唔係吖！人o地''Alan & Lukas Riva 都唔洗用呢件嘢！3c機手例外

吾係架..佢地跟本吾會裝機整機...比支螺絲批佢地都冇用....

原帖由 ukyo 於 2008-7-29 14:32 發表

                               
登錄/註冊後可看大圖

吾係架..佢地跟本吾會裝機整機...比支螺絲批佢地都冇用....

你又啱

我地玩機仔既無甘要求高既,EP200,400,450,500 and some cheap 50 nitro size

You will need it when you know it...Maybe not this type,As i know K & S have one same think

SORRY....I'm not talking about who must need this tool's,Just i think better than use the eye to balance

P.S Alan and Jason is friend of mine scene 2004,They also use a lot of tool's for balance all arround his helicopter

I'm really sorry about that

大家討論吓都好嘅 ........教主兄..如果你要求唔高都可以唔洗用，番正玩的一手好機都係技術行先、工具只作輔助

[ 本帖最後由 Han 於 2008-7-29 17:44 編輯 ]

good good

新手要來沒大用...飛上來都係要trim 過
到你老手...都懶得去用...XDDDD

點解玩乜都要 set....好煩 ~~~

順便問問 E325 係味可以當 "玩具級" 易飛 d 呢 ?
飛到 flight sim 可以飛 E325 ? ( 是但遊o下機河吾係 3D )......

我覺得無用,只有花巧,因水平盆平,飛巴不平也偏,CG不平也偏,大槳不對也偏..........環有好多...

原帖由 zifu 於 2008-7-30 11:55 發表

                               
登錄/註冊後可看大圖

我覺得無用,只有花巧,因水平盆平,飛巴不平也偏,CG不平也偏,大槳不對也偏..........環有好多...

So.....need it tool's to balance almost only for F3C,I really setup my Eagle3 from engine cooling fan up to rotor blade and the tail blade need balance too..

SORRY ZIFU


我覺得有用,無有花巧,因水平盆平,飛巴也平,CG也平,大槳也平..........環有好多.....

P.S for 3D is no need set too much....

原帖由 教主 於 2008-7-30 03:55 發表

                               
登錄/註冊後可看大圖

點解玩乜都要 set....好煩 ~~~

順便問問 E325 係味可以當 "玩具級" 易飛 d 呢 ?
飛到 flight sim 可以飛 E325 ? ( 是但遊o下機河吾係 3D )......

E325係450CP機,當會具玩可能又見報師兄 ..架機比T-REX重,基本要有2千6轉以上先會算穩定,打中人就......

E325一定會易飛,機設計係負delta設計,會比較鈍,有人會叫油機feel..450機油機感覺..

飛到SIM約得4成可控到機,

E325架機都吾易SET,膠件好快變形之後震,最好用原裝槳,就算加了比325用的槳夾膠都會係咁雙槳,因原裝槳係槳頭等地方落了重鉛,槳都重D,機食的A數都高D,原裝電變同馬達都好熱,做激烈動作會林轉,通常都會換晒,