Tech - TAMIYA M03 4WD racing conversion

TAMIYA M03 4WD racing conversion (temporary) details announcement

A photograph is prototype.
I review shape of mounting it and am testing height of an upper deck and a body now.


I inform it of only specifications deciding now.
◆ Two belt drive 4WD
◆ Front and back ball demister (a housing made by Delrin) front and back pulley 35T
◆ Center direct specifications 15T pulley（Second slowdown ratio 2.333）
◆ It is mounted a motor made by duralumin
◆ Main chasis, upper deck, front and back damper stay, front and back body mount stay are full carbon paper specifications of 2.0t thickness
◆ サスアームマウント made by duralumin（Front and back）
◆ It can carry a supermini damper for M03 made in us and a TRF damper made by Tamiya
　（Because installation positions are different, the part which supported is attached at the time of the TRF damper deployment）
◆ It is light blue Alumite treatment to all aluminum parts
◆ As for this article, an extra Tamiya M03M kit is necessary.

Expected price 29,800 yen
100 limited production

On an official sale date, I will announce official names later.

翻譯可能有錯

Expected price 29,800 yen

呢個價錢都算ok喎~

日本仔真係賤,
嘜q都限量, 與眾同樂唔得架咩~?

原帖由 lkfandy 於 2006-9-3 23:06 發表
◆ As for this article, an extra Tamiya M03M kit is necessary.

  

For what purpose M03M kit is need? I really can't see a point here.
Seems only need the arms, wheels, shell and the shell mount, and these being easily 'replaced'.
to Tech Racing !!! as I like it a lot in the days of M01's option.

[ 本帖最後由 rc2006 於 2006-9-4 00:13 編輯 ]

hkd即係幾錢呀~?

Below HK$ 2K!

都算低啦

原帖由 SPOONACCORD 於 2006-9-4 15:56 發表
都算低啦

但係數量有限, 有錢都未必可以買到

其實依架仲係咪 m03?

原帖由 ellis 於 4/9/2006 06:21 PM 發表


但係數量有限, 有錢都未必可以買到

講係咁講姐,佢可能會出CONVERSION KIT或者OPTION變呢架既PARTS加麻,唔散賣點賺你多D錢!?成架只係像徵式賣100隻之麻.............人地比左錢同時間心機去開發冇理由賣咁少既..................

[ 本帖最後由 ALEXANDER 於 2006-9-9 23:05 編輯 ]

都係平平地買ｍ－０３算

原帖由 aloha 於 2006-9-9 22:54 發表
其實依架仲係咪 m03?

Agree.....