RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2950|回復: 7
收起左側

ching們用幾多t 的摩打在formula車上??

  [複製鏈接]
hungm55hk 發表於 2011-2-15 20:29:30 | 顯示全部樓層 |閱讀模式
多選投票: ( 最多可選 4 項 ), 共有 48 人參與投票 查看投票參與人
12.50% (6)
8.33% (4)
20.83% (10)
58.33% (28)
您所在的用戶組沒有投票權限
JOEJO 發表於 2011-2-16 17:39:38 | 顯示全部樓層
I use 'fan black pig' very fun!!
 樓主| hungm55hk 發表於 2011-2-16 19:30:30 | 顯示全部樓層
如果用5.5t 或者更快的摩打係唔係會好難控制?
nel3838 發表於 2011-2-17 08:00:14 | 顯示全部樓層
本帖最後由 nel3838 於 2011-2-17 08:01 編輯


Yes - more difficult to control.  And no need 5.5T as the RPM will be too high.

Many C-Hing (and in race events) use 17.5T, with ESC Turbo, are already fast on the straights (can catch touring car sometimes).  RWD (F1) are harder to drive than 4WD in cornering so need more precise control; but with 5.5T for example, may make it even more difficult in cornering.  In F1 races with 17.5T standards, the cars are very quick with the top drivers (and exciting to watch in my opinion, and very scale like ).

Advantage of 17.5T with turbo is that you only need the power on straight and not during cornering, so should be best of both worlds.  Also, the setup will be very efficient and the battery lasts a lot longer.  (I get 15-20 min run with 3000 25C, which is economical).

M2C
strike 發表於 2011-4-6 10:11:42 | 顯示全部樓層
what is the gear ratio of 17.5T ? thanks
pma 發表於 2011-4-6 16:59:48 | 顯示全部樓層
Yes, I also want to know the mix of motor gear and spur gear by using 17.5T motor. Thanks.
slowerthanyou 發表於 2011-5-5 23:10:26 | 顯示全部樓層
I have the 9t/4300Kv hobbywing motor. what gearing should I use for JV? Is it too fast? Thx
yung2yee 發表於 2011-5-6 11:03:03 | 顯示全部樓層
9t or 10t is ok. Gearing is around 1:4 up and down. This is my favourable.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2026-2-13 07:26 , Processed in 0.069496 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表