磨膠呔的問題

小弟巳自動自覺地把 某部份令人產生不安的內容刪除, 以迎合各位師兄

Quoted from the article:
"All rubber tires for touring cars will have a noticeable seam down the center that is leftover from when they were produced. If the seam is large enough, it can have negative handling effects on your car. In the worst-case-scenario, the seam could cause your car to break traction early in the race, which hurts some of your early lap times and adds unnecessary heat to your tires   (which will hurt some of your later lap times). "


http://nexusracing.net/newsdesk_ ... 07f303e39a861112865

Bro rc1, which state are you in?  

I have seen people using tire machine at the track, but I didn't pay attention on the brand or model.  Seems to me that it was one guy brought the machine, and shared to a group of the racers.  Believe or not, many of them used it.  And yes, I am talking about rubber tires.

師兄,rubber tire 我見人都係用yokomo部机再用錯磨平中間條骨就算, 唔洗成個面磨.auto机mainly for foam tire用, rubber tire 冇咁須要.

小弟認為, 錢都係可以跑快 d 既重要因素之一。但係請 wingwing 兄唔好段章取義，我冇話我 d 磨咗嘅呔落塲跑1圈已不balance .... 嘻嘻

I don't seem like a "pro" because I'm truly n ...
rc1 發表於 2009-7-14 02:49

                               
登錄/註冊後可看大圖

"磨咗嘅呔落塲跑1圈已不balance" 係我講嘅，唔係你講嘅，令你誤會，唔好意思....

我嘅意思係：就算磨balance咗條呔，一落塲跑就好快變不balance，因此磨嚟冇用(對我嚟講)。

不過，對在比賽中的比賽者又另計，這是最有效率及給于信心的保證。所謂：把可以做的，都做到最好。

師兄你有這個想法，小弟萬分佩服....

可能當初與各師兄言語間有所誤會。相信各師兄並沒有惡意...

師兄,rubber tire 我見人都係用yokomo部机再用錯磨平中間條骨就算, 唔洗成個面磨.auto机mainly for foam tire用, rubber tire 冇咁須要.
abcd 發表於 2009-7-14 11:58

                               
登錄/註冊後可看大圖

agree x 2

其實磨呔機除左磨呔骨之外,的確係有人每轉返黎都會百潔布磨呔既表面,用意唔係磨返四條呔一樣大細,
而係磨走呔表面D污漬,等同用cleaner沫呔再搽呔水一樣,所以現在都好小見人用膠呔磨呔機,除非要比賽
開唔切呔啦..

"磨咗嘅呔落塲跑1圈已不balance" 係我講嘅，唔係你講嘅，令你誤會，唔好意思....

我嘅意思係：就算磨balance咗條呔，一落塲跑就好快變不balance，因此磨嚟冇用(對我嚟講)。

不過，對在比賽中的比賽者又另計，這是最有效率及給于信心的保證。所謂：把可以做的，都做到最好。

師兄你有這個想法，小弟萬分佩服....

可能當初與各師兄言語間有所誤會。相信各師兄並沒有惡意...
wingwing 發表於 2009-7-14 14:43

                               
登錄/註冊後可看大圖

其實我十分同意，d 呔跑一圈後係冇可能有太大分別。但跑完一兩個 15-20mins 後, d 呔會熱左軟左。加上 tire warmer 暖住條呔, 玩左兩三日, 真係用肉眼都睇到有 d d 分別。當然, 我承認就算如果唔 refresh d 呔都可以繼續跑, 最多咪用技術撘救囉 。 但係, 我自覺在技術上我仲未做到 stable, 咁唯有希望在 setting 上下 d 功夫。正所謂: 工欲善其事, 必先利其器!    

或者, 有人會覺得我吹毛求瑕.... 但係, 我當係 "學野"。就好似 gear ratio 咁,  7.15 , 7.28 和 7.41.... 究竟有乜分別。可能細微到 feel 唔到, 但如果唔 "嘗試、綀習、改良、再嘗試、再綀習、再改良".... 咁可能真係永遠都 feel 唔到!

以上純粹個人吹水!

其實磨呔機除左磨呔骨之外,的確係有人每轉返黎都會百潔布磨呔既表面,用意唔係磨返四條呔一樣大細,
而係磨走呔表面D污漬,等同用cleaner沫呔再搽呔水一樣,所以現在都好小見人用膠呔磨呔機,除非要比賽
開唔切呔啦..
sammy 發表於 2009-7-14 20:02

                               
登錄/註冊後可看大圖

我都見過有車友用清潔濟抹呔, 但係多數係玩 outdoor 多沙石既地。

其實, 手動磨呔機我一直都知有人用.... 只不過, 唸住 "全自動應該會好 d 呱" 咁姐....

師兄,rubber tire 我見人都係用yokomo部机再用錯磨平中間條骨就算, 唔洗成個面磨.auto机mainly for foam tire用, rubber tire 冇咁須要.
abcd 發表於 2009-7-14 11:58

                               
登錄/註冊後可看大圖

係呀, 多數人都係只磨平條骨。但我自己覺得, 開新呔時除左要磨去呔骨, 將呔面磨走表面小小的一層, 呔水會吸收得好 d。但唔好磨走太多.....

純粹個人意見!

Bro rc1, which state are you in?  

I have seen people using tire machine at the track, but I didn't pay attention on the brand or model.  Seems to me that it was one guy brought the machine, and shared to a group of the racers.  Believe or not, many of them used it.  And yes, I am talking about rubber tires.
GigaRacer 發表於 2009-7-14 05:35

                               
登錄/註冊後可看大圖

Thank you, Bro.

Good information!

90# rc1


C Hing, which state and where do you play?

其實我十分同意，d 呔跑一圈後係冇可能有太大分別。但跑完一兩個 15-20mins 後, d 呔會熱左軟左。加上 tire warmer 暖住條呔, 玩左兩三日, 真係用肉眼都睇到有 d d 分別。當然, 我承認就算如果唔 refresh d 呔都 ...
rc1 發表於 2009-7-15 02:31

                               
登錄/註冊後可看大圖

D 呔一落地跑好快就唔平行架啦...

我都見過有車友用清潔濟抹呔, 但係多數係玩 outdoor 多沙石既地。

其實, 手動磨呔機我一直都知有人用.... 只不過, 唸住 "全自動應該會好 d 呱" 咁姐....
rc1 發表於 15/7/2009 02:34

                               
登錄/註冊後可看大圖

原來ching 係玩 outdoor ~自已鋪路碟玩?
襟你而家玩緊咩車?
不如影下架車相黎睇下la~ 我好奇想睇下~

83# rc1

Thank you for your sharing