IQ題

Calibre四條有一條黐錯咗方向, 最後典樣搞返掂...?

回復 tonglau2000 的帖子

哈哈,真喺乜都有人試
記唔記得边位喺師祖?
揾日屋企無人試吓先

好耐之前有人教過, 因為果時 TKO 爛地, D 呔去得好快, 我地呢 D 窮人就可以甩番 D 轆再用, 夠環保,  而家平左好多, 好小人會咁做

tonglau2000 發表於 2012-4-24 18:42

                               
登錄/註冊後可看大圖

c-hing  你大約升溫至多少度? 實際温度我地仲未掌握得到, 焗爐好似要預熱添

唔屎預熱, 約300度, <10mins OK!

tonglau2000 發表於 2012-4-24 13:59

                               
登錄/註冊後可看大圖

我見過有人用焗爐可以溶左膠水, 甩番條呔出黎
因為見到大肥試過係得!

c-hing  你大約升溫至多少度? 實際温度我地仲未掌握得到, 焗爐好似要預熱添

ching,唔係串你,不過我相信無人會好似你咁做...掉左佢,大佬最多米買多4条呔鈴砌番佢2sets,唔駛掉下話?

掉左套呔鈴，然後買套新既！吾使煩！

我又係咁,2条啱,2条錯,無理佢,照玩,跟本就完全無分别

照玩,唔理佢咩方向...

本帖最後由 private 於 2012-4-24 16:28 編輯


餘下2條黐反方向 ,一條和第一條一樣

餘下3條黐同一方向 和第一條一樣!

開估未？

大蛇落場飛兩轉就咩呔都甩晒，唔洗煩。

搵個friend買套, 換一隻比佢

其他人可能會好懊惱

答案好簡單

可否用 D 帶有熱力 cutter , 慢慢熱 cut D 膠水邊

The other three tires not yet glued!  Only glued 1 tire....

鬼佬網教過，係落水煲，但只可以keep 鈴，呔就無用。

thx to eruo614 c-hing, I understand the question. here's my 0.0039 cent's worth

1. CAREFULLY cut along the edge of the tire and rim to remove. I have tried this and results have been good/bad depending on how patient I was at the time.
2. I've heard people using acetone (nail polish remover). Put the wheel in a metal tin. Then put in a wad of cotton wool/paper soaked with acetone. Close lid and leave over night. Remove tire from rim by hand. Note I have never tired this and apparently some plastics and tire do not react well to acetone. i.e. you might be left with an unusable tire + rim at the finish.

good luck fr888 c-hing.