Axial Yeti 改裝成為1/10 Trophy Truck

Axial Yeti 改裝成為1/10 Trophy Truck 最早期 Axial 要出一架 solid axle Yeti 嘅時候，其實我已經諗左好耐點樣改裝。可惜yeti嘅軸距太長，唔啱裝1/10 SC 車殼。有人用1/8 SC8嘅車殼，但我始終唔鍾意。

最新 Update 6/17/15 First Run Video https://youtu.be/E7NOZbJEqtU

                               
登錄/註冊後可看大圖

update 6/13
Allow me to walk you through this truck and let's see the result together !
Youtube video http://youtu.be/_eqkGocZlRg

                               
登錄/註冊後可看大圖

我依家終於等到適合嘅改裝零件，Axial yeti 變身成為1/10 trophy truck 可以同我其他1/10 short course truck 一齊跑。Part1 車架改裝大概完成，跟住落嚟要做車殼改裝。大家先睇第一拍條片先。

Youtube Video http://youtu.be/u6AR_LteUd8

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

Getting the rear bumper attached was a breeze

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

Getting just the trailing arm and upper link are good enough to shorten the wheelbase. All other parts from the spare parts bin for my slash. Complete Parts List - This is truly a budget build if you already own a yeti. All parts listed in USDProline 2740 slash protrac Scte Wheels - $8
Proline 2734 Slash Wheels - $8
A set of 4 Proline Trencher M3 - $50
Proline Ford Body - $30
Tamiya Paints Blue and Silver - $14
Red Bull 1/10 Shortcourse Decals - $20
Wraith Upper links Set - $10
Twin Hammer Trailing Arms - $10
Spider Gears and pin to Unlock rear diff - $10

DLAM 發表於 2015-6-1 09:33
Great idea! Don't know why big brands never release any trophy truck.  I am going to make o ...

This the upper links set.

http://pages.ebay.com/link/?nav= ... amp;id=221597543638


And this is the trailing arms from twin hammers.

http://pages.ebay.com/link/?nav= ... amp;id=281399372128

billgate803 發表於 2015-6-2 07:35
在 YouTube 上觀看「Project NSP-1 RC Trophy Truck :: The Whoops Killer :: Slow-mo GoPro Edit」 - http ...

係呀嗰條片超正，佢嗰部車完全係百分百原創。佢啱啱upload嗰陣我已經睇咗無數次。希望我呢部山寨版嘅避震都可以有咁正。

Bit more work done.

                               
登錄/註冊後可看大圖

  

                               
登錄/註冊後可看大圖

billgate803 發表於 2015-6-2 11:39
yeti 部車原裝頭彈簧唔夠長，又唔夠硬，可以改axial wraith  的14x70mm firm彈簧， 已改善彈力不足情況
...

好提議

Progress

最新圖片

參考圖片

Decals

Picture for now, video soon.  

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

                               
登錄/註冊後可看大圖

Allow me to walk you through this truck and let's see the result together !

Youtube video http://youtu.be/_eqkGocZlRg

                               
登錄/註冊後可看大圖

Thank you so much! I am working on runnin videos, stay tuned for them.

最新 Update 6/27/15 First Run Video https://youtu.be/E7NOZbJEqtU

                               
登錄/註冊後可看大圖

mikuro 發表於 2015-6-28 09:59
Very nice !

Thanks

其實兩樣我都有用M2 and M3,落場消耗程度其實冇乜分別，