DT-02 MS

原帖由 ryancmlam 於 2007-12-25 18:56 發表

                               
登錄/註冊後可看大圖

Bro Joe,

Very  nice DT02MS. Let my DT02 race with your DT02MS at TKO then.

Ryan

我又玩

避震 有改短嗎？

原帖由 go2usie 於 2007-12-26 23:53 發表

                               
登錄/註冊後可看大圖

thanks ryan~
i will put a 540VZ motor to try try~
i m not sure how many turn it is .... it is came from Avante

540VZ
Usable voltage: 7,2V - 8,4V
Torque at best efficiency: 430g-cm (7,2V)
R.P.M. at best efficiency: 19.000rpm (7,2V)
Current drain at best efficiency: 14A (7,2V)
Best efficiency: 81% (7,2V)
Turns: 21 single - 0,8mm

[ 本帖最後由 li5115 於 2007-12-27 02:32 編輯 ]

原帖由 recargo 於 2007-12-27 01:16 發表

                               
登錄/註冊後可看大圖

21 turn ?? but your one is long time ago. I do not scare

This 540VZ was a 1986's product. it's 19,000rpm only but high torque.
Compare with today's 23T TZ or BZ(over 25,000rmp), it still a bit slow.
If this 540Vz in good condition, it must faster than the SportTuned(18,500rpm and 350g-cm).

My DT-02 fits with a BZ 23T.

[ 本帖最後由 li5115 於 2007-12-27 02:35 編輯 ]

原帖由 go2usie 於 2007-12-27 03:03 發表

                               
登錄/註冊後可看大圖

Leo~ if it is a tamiya 02H ne~~???

do u think it would be competitive with 23T ?

i have this too. please do me some advise~~~

Dynatech 02H (1989)
Torque at best efficiency: 413g-cm (7,2V)
R.P.M. at best efficiency: 25.000rpm (7,2V)
Current drain at best efficiency: 19,3A (7,2V)
Best efficiency: 74% (7,2V)
Turns (6513W):13 double - 0,65mm
Turns (7010W):10 double - 0,7mm
It's better than the 540VZ. Compare with the 26,500rpm BZ 23T, it still...