ENGINE lock 死咗

LOCK死左 係拉唔到嗎.? 還是?
但係有可能係太多油都唔定

模型我唔知 但係剪草機的motor 就係甘 ,加太多油就拉唔到 或拉唔著
Tiger_lui 發表於 2009-5-8 11:53

                               
登錄/註冊後可看大圖

I got the same experience in my 1st nitro RC, it may be full of oil in the engine, try to loosen the 火咀後, 倒轉engine, 拉手拉幾下,see if tehre is oil coming out.
If yes, do it until no oil comes out, tighted the 火咀, restart the engine again.
Try Try!

11# edmondhk

It usually can be pulled, if not, may be problem of bearing or connection rod as mentioned by other bros above.