Want to get into 1/12 car

幾款12仔link pan car (除左YOKOMO外)無論價錢同設計都大同小異,
不過都可以簡單分用"SIDE SHOCK" (亞so屎R5.1, 蛇)同用"DAMPER TUBE"(CRC, TOP)去做扭腰,
DAMPER TUBE o既設計同調較都比較簡易, 耐用程度都似乎較高.
如果新入手, 可以考慮damper tube o既設計.
damper tube o既link car....crc同top都似乎比較易搵parts.
講樣同finishing, top似乎好d, 不過 crc 有歷史有往績(但係衰在用縲絲用美規).
兩者中我有crc...零件做工真係麻麻...不過o係無咩點set o既情況下, 用3.5t 都尚算好跑.

以上資料希望幫到你~

回復 14# bigheman

12仔用特別SIZE SERVO...常見有FUTABA 9650.
SAVOX 同SANWA都有出.

回復 17# Dsius


唔記得型號了...問店員一定知~

回復 20# bigheman

I saw your reply.  The offer is super attractive!!!!

While I was rebuilding this Asso 1/12, and found that there are lots of slack in the steering push r ...
bigheman 發表於 2011-3-21 22:07

                               
登錄/註冊後可看大圖

咁你今日跑完, 覺唔覺有鬆, 會走o太呢 d 情況出現?  無就唔使攪了