RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2833|回復: 18
打印 上一主題 下一主題
收起左側

原裝Slash + 3S A123 測試結果

[複製鏈接]
1#
Marco明 發表於 2009-2-24 11:23:02 | 顯示全部樓層
原帖由 hardmankam 於 2009-2-23 11:39 發表
Hobbywing 60A is ok, maybe look into EC Power set since it is sensored brushless.

For Lipo 2S (7.4): ~ 5000kv motor
For Lipo 3S (11.1): ~ 3500kv motor
For Lipo 4S (14.4): ~ 2300kv motor
It is pl ...

其實呢d short course truck用好盈無感4300 kv夠唔夠快(係tko計)???
2#
Marco明 發表於 2009-2-24 12:06:25 | 顯示全部樓層
原帖由 hardmankam 於 2009-2-24 11:56 發表


Traxxas Slash is about 2100g... it is heavier than normal 1/10 truggy (~1600g).  So it is better to use 3S + lower kv motor.

If you pair it with hobbywing 9t, it may overheat the motor. Since  ...

好盈9t唔係540 class咩???我部df-03都用緊呢隻9t
3#
Marco明 發表於 2009-2-24 12:27:21 | 顯示全部樓層
原帖由 hardmankam 於 2009-2-24 12:25 發表
From hobbywing website on 9T-13T motor:

'This 3650-M sized motor has a core of 380 class motor but the outside appearance is as same as  540 class motor, so its size is suitable for all 1/10 chassi ...

原來係咁~~~
咁邊種先係原始540摩打???

[ 本帖最後由 Marco明 於 2009-2-24 12:28 編輯 ]
4#
Marco明 發表於 2009-2-24 12:47:04 | 顯示全部樓層
原帖由 hardmankam 於 2009-2-24 12:42 發表


Dont worry, DF-03 is light.  Hobbywing 9T is ok.  Just watch your gearing.

明白哂~~~thank you
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2025-10-2 02:31 , Processed in 0.026991 second(s), 16 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表