RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 6263|回復: 50
打印 上一主題 下一主題
收起左側

非常殘的959

[複製鏈接]
跳轉到指定樓層
1#
bololo 發表於 2008-2-22 19:22:19 | 顯示全部樓層 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
剛於昨天期翻新完這部959,殘破不堪的車殼
2#
 樓主| bololo 發表於 2008-2-22 19:34:33 | 顯示全部樓層
Sorry! I mean the chassis
By the way, I believe the body is no way to restore since it is really damaged seriously!
3#
 樓主| bololo 發表於 2008-2-22 19:55:27 | 顯示全部樓層
Hi! Brother! Welcome your nice photos!!
I surprise the lower rear arms are made by aluminium!!
Are thet tailor made by you or somebody? Possible to order the lower front arms?
Since the exisiting arms were broken before and just fixed by glue only!
Please advice, thanks!
4#
 樓主| bololo 發表於 2008-2-22 20:34:18 | 顯示全部樓層
Wow! Bravo! You can make them by yourself!
What parts do you need? to fix another one 959? I will try to find from the limited parts stock.
5#
 樓主| bololo 發表於 2008-2-22 20:38:40 | 顯示全部樓層
Hi! Brother go2usie, where do you live? I live in Kwai Chung. See when can race together.
6#
 樓主| bololo 發表於 2008-2-23 16:58:33 | 顯示全部樓層

回復 26# 的帖子

This is regret the Celica without body!
Any brother have this and willing to transfer to me?
Even old and damaged (not too serious) is fine for me
7#
 樓主| bololo 發表於 2008-2-23 20:10:46 | 顯示全部樓層
原帖由 go2usie 於 2008-2-23 14:43 發表
do brothers think, we can replace it with the 1:12 Porsche 934 body on our chassis ??
just to adjust the offset of rim.... ??

or this tire size fit the 959 rims ???


Sorry brother, the wheelbase of 934 is 190mm and 959 is around 210mm (measured by myself). Different is too big to fit.
8#
 樓主| bololo 發表於 2008-2-24 10:09:04 | 顯示全部樓層
原帖由 minimini 於 2008-2-24 00:03 發表


Hi bro bololo.........how about the width of 959 ?? (when compared with the 934)........ Thx !!


Hi! The width of 934 is 167mm and 959 is 172mm (figure from Tamiya club), thanks!
9#
 樓主| bololo 發表於 2008-2-24 10:34:47 | 顯示全部樓層
原帖由 go2usie 於 2008-2-23 14:11 發表
Bro bololo~ just wonder u own both Celica and 959~

Hi! Brother, yes, I have both since spent very much before.....
10#
 樓主| bololo 發表於 2008-2-24 20:37:35 | 顯示全部樓層
原帖由 skleejames 於 2008-2-24 01:41 發表


very good job, especial the aluminium front and rear arms.
I have 959 too, but one of the broken front arm is lost by a careless guy who said he can copy an aluminium one for me, but.....   ...


Any brother know what kind of plastic of front and rear arm? Since these parts are most easy to be cracked and instant glue is always no function fror them.
11#
 樓主| bololo 發表於 2008-2-24 23:43:59 | 顯示全部樓層
原帖由 tiger1 於 2008-2-24 23:35 發表


Those should be polystyrene, which the whole car was made of. Too brittle.

Thanks Brother Tiger1! So do you know what kind of glue can fix broken partsof 959? Thx again!
12#
 樓主| bololo 發表於 2008-2-25 00:34:35 | 顯示全部樓層
原帖由 tiger1 於 2008-2-25 00:18 發表
I would try epoxy. However, the most common epoxy in HK is Aralite, which is not too good after a few years.

The best epoxy I have ever tried was 'JB Weld', not very common in HK.

Do ...


Wow! Very detail explanation!! Thank you very much brother Tiger1!!
13#
 樓主| bololo 發表於 2008-2-28 23:36:01 | 顯示全部樓層
原帖由 go2usie 於 2008-2-28 13:02 發表
Any brother has this spare part ? can be new or used .


Oh! I think this is the one of most easy broken parts of 959 and rare in market even in Ebay.
14#
 樓主| bololo 發表於 2008-3-4 21:55:57 | 顯示全部樓層
原帖由 tiger1 於 2008-2-29 13:00 發表


Yes, those are acrylic resin (PMMA or polymethylmethacrylate resin), very strong, good for polystyrene material like 959. But only good for bonding plastic to plastic, got to be hard plastic too.


Thank you brother fat_fat_cat and tiger1 for detail explanation!!
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-11-1 07:43 , Processed in 0.264369 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表