RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

 找回密碼
 新玩家註冊
搜索
查看: 2064|回復: 8
打印 上一主題 下一主題
收起左側

My modified Hot Shot

[複製鏈接]
跳轉到指定樓層
1#
lin6499 發表於 2009-8-23 21:53:41 | 顯示全部樓層 回帖獎勵 |倒序瀏覽 |閱讀模式

遊客登錄

您需要 登錄 才可以下載或查看,沒有帳號?新玩家註冊

x
本帖最後由 lin6499 於 2009-8-24 18:52 編輯

My modified Hot Shot (not 100% finished). It is equiped with center one-way, four oil dampers, CVD shafts and most importantly, the new steering system.

TM E4 Steering system. It works very smooth.

                               
登錄/註冊後可看大圖


With red annodized or painted parts, makes it a different kind of "Red Shot".

                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


Modified center one-way.

                               
登錄/註冊後可看大圖
2#
 樓主| lin6499 發表於 2009-8-23 22:03:08 | 顯示全部樓層
本帖最後由 lin6499 於 2009-8-23 22:05 編輯

One more picture of center one-way.

                               
登錄/註冊後可看大圖


When assembling, pay more attention to this step. In my case, there's a little modification in the gear boxes so that the bearings works OK.

                               
登錄/註冊後可看大圖


nearly 100 % done, except for the steering system.

                               
登錄/註冊後可看大圖
3#
 樓主| lin6499 發表於 2009-8-23 23:12:23 | 顯示全部樓層
本帖最後由 lin6499 於 2009-8-23 23:15 編輯

Patrick. That's a good point. I ordered a mini-servo. As a result, there's a tiny room for ESC and receiver in the back. The servo is still on its way, so I don't know if those things fit or not and therefore I am worried about the space.
您需要登錄後才可以回帖 登錄 | 新玩家註冊

本版積分規則

手機版|小黑屋|RC EVOLUTION - 遙控工房

GMT+8, 2024-6-6 00:32 , Processed in 0.027190 second(s), 17 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回復 返回頂部 返回列表