頂! 一次過 Li-Po battery

頂! 一次過大出血.. 以後唔吏煩

[ 本帖最後由 Ken 於 2006-12-9 12:35 編輯 ]

我用 ICE 差, 用 2 Cell and 3.2A.. 當然係 Li-po mode

原帖由 orange00 於 2006-12-9 12:23 PM 發表

我用1c差

用1c差真係有排差..

原帖由 s 於 2006-12-9 12:32 PM 發表



以後?玩10年呀?

Brother 以後唔使煩意思係唔使放電呀!! .. 用NiMH最煩要放電. Li-po唔使... .我都無話以後唔使換電.  你不如話100年喇, 咪可以更突出 "以後" lee兩個字...

原帖由 s 於 2006-12-9 12:40 PM 發表


差幾耐?

大約 4200 5.5A 時間

原帖由 pat1111 於 2006-12-9 12:43 PM 發表


ICE 可以咁大A差 Li-po 電,遲D要搵番隻先得.

Input Voltage: 1-15V DC
Battery Types, # of cells: 1-10 Nickel-Cadmium cells (1.2-12.0V NiCd)
1-10 Nickel-Metal Hydride cells (1.2-12.0V NiMH)
1-4 Lithium-lon or Lithium-Polymer cells (3.6-14.8V Li-lon/Li-Po)
Battery capacity range: 100-9900mAh Fast charge current: 0.1-8.0A (1C max for Li-lon/Po)
Fast charge methods: linear, reflex, impulse and 4-step
Fast charge termination: Peak detection for NiCd and NiMH "constant current / constant voltage" for Li-lon / Li-Po optional thermal cutoff for all battery types Peak sensitivity: 0-25mV adjustable Trickle charge current: 0-500mA (n/a for Li-lon / Li-Po)
Discharge current: 0.1-10.0A adjustable
Dishcharge cut-off voltage: 0.1-1.1V per cell NiCd & NiMH 2.5-3.7V per cell Li-lon / Li-Po
Temperature cut-off range: 50-132°F (10-56°C)
Cycle count: one to ten cycles (n/a for Li-lon / Li-Po) Cycle cooloff delay: 1-30 minutes adjustable
Battery memories: 10 Display type: 8 line, 21-character LCD (168 characters max) Graphical displays:
Graphs charge and discharge voltage curves Output connectors:
banana jacks (two adapter leads included)
Motor break-in: 1.0-8.0V selectable, 1-120 minutes, 10A constant

[ 本帖最後由 skyrobber 於 2006-12-9 12:57 編輯 ]

原帖由 s 於 2006-12-9 01:02 PM 發表


唔使放電?死 la 我唔知呀師兄

宜家你咪知 law

原帖由 s 於 2006-12-9 01:13 PM 發表


我 d fd 耐唔耐放

Balance charge 重要過放電.. 差大約10次就做一 balance. 可以keep 住 performance. 基本上每次用 balance charge 最好但時間長.

[ 本帖最後由 skyrobber 於 2006-12-9 13:20 編輯 ]

原帖由 s 於 2006-12-9 01:37 PM 發表


同match有咩分別?

電頭同電尾一樣爆, 一係爆 一係無電.. Match 電差頭果十次左有就爆頭爆尾, 之後慢慢 drop performance.  Li-po 都曾 drop performance 但係慢過 NiMH. Li-po 不用放電及可以姦電, NiMh 要放電及休息.. 此乃本人之經驗及用後結果, 不代表其他人.. 唔好 challenge 我..

原帖由 i-Drift 於 2006-12-9 04:38 PM 發表
係咪已經焊好左電線? 蕉插?

已經蕉 Hole

原帖由 cHRisTiAN 於 2006-12-9 07:17 PM 發表

Balance charge要差幾耐?
普通差法又要幾耐?
THANKS

Balance charge 比普通差多 3/1 時間, 因為個 balancer 會互相等兩舊電的 voltage 一樣, 如一舊高一舊低 balancer 會差低果舊先, 如果一樣就一同差.. 普通差大約差 4200 用 5.5A. 45min

原帖由 zoozoo 於 2006-12-9 08:35 PM 發表
乜宜家D充电器有大A数GE锂电平衡充啦？我家宜仲用紧国产果D锂电平衡充电器，真系充得好慢。。。一排4200要充三个钟

外置的, 自巳做線.. Up to 6A charge current.

原帖由 kawada 於 2006-12-11 02:07 AM 發表

Thz our point .. as a casual & " H " driver like me .. we can simply charged them all up days b4 our RC fun .. and hassle free with any discharging stuffs .. But as for some pros it ...

Yes, what a good "damn Care"... only enjoy RC fun. damn care money, damn care the rule..

原帖由 i-Drift 於 2006-12-11 01:20 AM 發表
Which of these two chargers is better for Li-Po?

ICE can only charge at 1C max.

How about Team Orion one?

Brother, 1C charge is enough la... Not 1A charge.. beware

原帖由 1982zxl 於 2006-12-12 11:18 PM 發表



3cell   lipo   11.1V

what type of 1/10 ESC can support 11.1v lipo??

原帖由 RC 於 2006-12-11 08:19 AM 發表
Orion charger can charge at 1C to 3C, if charge orion4800Lipo, u can set it on 1C 4A, about 1 and half hour be full charge. And remember don't and never discharge the LiPo battery.......

3C is 3 time of Amp input. Too risking.. For 4800 lipo, 1C charge = 4.8A, 2C charge = 9.6A, 3C = 14.4A... Yes, charging time will be very short, but the life of Lipo also short... Becarefull, not all lipo can support over 1C charging, otherwise the possibility of explode increse.....    In my opinion 1C is max for now a day lipo,



[ 本帖最後由 skyrobber 於 2006-12-13 13:39 編輯 ]

原帖由 kawada 於 2006-12-13 01:25 PM 發表


Mamba .. kakakakakkakaak ..  

http://www.castlecreations.com/products/mamba_max.html

Cells6-12 NiCad/NiMH
2-3s LiPo

Oh! SNAKE again... haha. We got to play all the time

原帖由 kawada 於 2006-12-13 01:46 PM 發表

I 2nd that..   just for ur easy reference .. damn care how many Cs .. just need to get one critical point in mind .. if ur lipo is 3200mah on 2S configuration .. then use 3.2A max with 2 cells mo ...

Just told 1C is good enough to charge the lipo, because some guys concern 2C and 3C charger.

原帖由 GigaRacer 於 2007-1-10 07:05 AM 發表
Hello Brother Skyrobber,

Any update on the three 3200 Team Orion Lipo that you bought?  Any good?  Longer run time?  I want to buy, too.  Getting sick with my dead NiMH batteries.  

3200 Lipo is good... The feels is around IB4200 WC.  Running time is bit longer then that, in my tested result.  1.25 time of IB4200WC. Quite good.  The running time is depends on your setting and ESC,  I use Snake 7700.

原帖由 buggy 於 2007-1-10 12:59 PM 發表
I bought the orion 3200 lipo too....after 1st run, the 2 cells inside have different voltage. 1 is 3.22V and the other is 3.33....I think i better buy a balancer for it, right? Orion advantage is n ...

You can charge invidually, use the middle injet to charge cell 1 and cell 2, will balance after that.. Need balance for few run or capaicity amp are less than around 3100.