RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 為配合 GTR 熱潮, 第 1 次手界的 [打印本頁]

作者: BHP 時間: 2008-8-17 23:42
標題: 為配合 GTR 熱潮, 第 1 次手界的
Update 了﹐
相相 link 了在簽名檔 =)

Close-up 就免了﹐
希望o係看臺睇唔好太肉孫啦~

本來都幾滿意的﹐
但聽日要同個 friend 格鬥﹐
所以 D 線唔用 tape 而係用筆上色﹐
即刻樣衰晒

[ 本帖最後由 BHP 於 2008-8-17 23:55 編輯 ]

作者: 阿De 時間: 2008-8-17 23:44
我睇完你部作品

突然覺得部gtr 35殼好型..

星期3 出去入番個先想問下你個拉花點整?

作者: Sin 時間: 2008-8-17 23:48
標題: 回復 1# 的帖子
Nice!! I am working on my R35 body now, same color as yours

作者: BHP 時間: 2008-8-17 23:49

原帖由 阿De 於 2008-8-17 23:44 發表

 登錄/註冊後可看大圖

想問下你個拉花點整?

o係裡面 body mask 完﹐ 用手界返個字出黎 =)

呢個殼諗住用黎做 alpha 版﹐
想試下條車身線同 Mine's 字既大小粗幼好唔好睇﹐
睇下出黎有咩地方可以做靚 D.

Beta 版個車身條線會二段色﹐
Mine's 字樣會整立體效果﹐
貼返 D sponsor 既貼紙等等。

因為呢個殼係用黎聽日 "俾人撞"﹐
做得太靚會心痛

作者: BHP 時間: 2008-8-17 23:50

原帖由 Sin 於 2008-8-17 23:48 發表

 登錄/註冊後可看大圖

Nice!! I am working on my R35 body now, same color as yours

Pearl white?

It's a very elegant body,
and the light cups are pretty nice too!
What a good deal @ $16x,
I'm probably going to make 2 more, 1 for grip 1 for drift

[ 本帖最後由 BHP 於 2008-8-17 23:51 編輯 ]

作者: 阿言 時間: 2008-8-17 23:54
唔錯呀…
不過d波浪紋怪怪地~~

作者: 阿De 時間: 2008-8-17 23:54

原帖由 BHP 於 2008-8-17 23:49 發表

 登錄/註冊後可看大圖

o係裡面 body mask 完﹐ 用手界返個字出黎 =)

呢個殼諗住用黎做 alpha 版﹐
想試下條車身線同 Mine's 字既大小粗幼好唔好睇﹐
睇下出黎有咩地方可以做靚 D.

Beta 版個車身條線會二段色﹐
Mine's 字樣會 ...

我指汁邊銀色果條拉花

回整真係好型

作者: Sin 時間: 2008-8-17 23:59
標題: 回復 5# 的帖子
Yes, pearl white too, and i will leave it as the "showroom look" for display.

Which chassis you put on this body?

作者: BHP 時間: 2008-8-18 00:07

原帖由 Sin 於 2008-8-17 23:59 發表

 登錄/註冊後可看大圖

Yes, pearl white too, and i will leave it as the "showroom look" for display.

Which chassis you put on this body?

I'm going to try it on my IFS-R tomorrow.

Tried a Protoform Mazda6 on it and it ran like a dream.
But this GTR body does sit further up on the chassis,
expecting it to have quite a bit more roll than the Mazda6.
Oh well, not using this body for performance anyways, so as long as it looks nice

Going to make a "real" one for the IFS-R,
and one more for Pro D

作者: Sin 時間: 2008-8-18 00:16

原帖由 BHP 於 2008-8-18 00:07 發表

 登錄/註冊後可看大圖

I'm going to try it on my IFS-R tomorrow.

Tried a Protoform Mazda6 on it and it ran like a dream.
But this GTR body does sit further up on the chassis,
expecting it to have quite a bit more rol ...

Nice combo! BTW attach the Mines R35 for your reference

: 登錄/註冊後可看大圖

作者: BHP 時間: 2008-8-18 00:31

原帖由 Sin 於 2008-8-18 00:16 發表

 登錄/註冊後可看大圖

Nice combo! BTW attach the Mines R35 for your reference

Thanks!

Yeah, the "original" Mine's only has the 拉花 up to the front fender,
but I prefer the "old style" along the whole body including front fender

How about your GTR,
going to make any patterns or simple-is-the-best?

作者: Sin 時間: 2008-8-18 00:42

原帖由 BHP 於 2008-8-18 00:31 發表

 登錄/註冊後可看大圖

Thanks!

Yeah, the "original" Mine's only has the 拉花 up to the front fender,
but I prefer the "old style" along the whole body including front fender

How about your GTR,
going to make ...

The original "Mines" 拉花 which is as classic as the "555" subaru

Attach photo which is my R35 in progress (still lot of work to finish it, just cut out the plastic cover to paint the area in black), I will leave it plain now (actually not much idea of 拉花 to put on it

). Now it is sitting on the TA03F pro chassis, and will use it for drift later.

[ 本帖最後由 Sin 於 2008-8-18 00:50 編輯 ]

: 登錄/註冊後可看大圖

作者: ELVINO 時間: 2008-8-18 21:46
都ok wor~~~~~~~~~

作者: BHP 時間: 2008-8-20 14:18
Unfortunately the GTR body x fast chassis = doesn't work

作者: forrestam 時間: 2008-11-13 10:44
GOOD!!

作者: BIAbenny 時間: 2008-11-13 15:03
Wow 師兄估唔到R35可以咁配Gun Metal, 型呢~

作者: koji1230 時間: 2009-4-16 15:40

唔錯呀…
不過d波浪紋怪怪地~~
阿言發表於 2008-8-17 23:54

登錄/註冊後可看大圖

d波浪紋 is Mine's...........

it's a upgrade manufactoy name...........

作者: KIT25 時間: 2009-4-16 17:05
very good

作者: GARY^^ 時間: 2009-4-17 00:26
好有型!

作者: ECpower-man 時間: 2009-4-17 08:18
好鬼死靚呀，師兄！

作者: savageSS 時間: 2009-4-17 17:30
無得頂

作者: COLT仔 時間: 2009-4-19 08:57
靚

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)