RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 粗幼鏈嘅分別 [打印本頁]

作者: minimini 時間: 2008-7-13 00:10
標題: 粗幼鏈嘅分別
啱啱喺 Tamiyaclub 度見到呢幅相.....即刻頭都痕.....

有冇兄弟知道嗰條幼鏈係セ Q 車用o架 ??......

我淨係知 optima 係用粗鏈咋.......

http://www.tamiyaclub.com/showro ... =77376&id=21211

[ 本帖最後由 minimini 於 2008-7-13 00:31 編輯 ]

作者: tiger1 時間: 2008-7-13 00:20
I thought all the 1/10 and 1/12 rc cars use the same size chain.....

I know there are some slightly bigger one in some machines (e.g. x-ray processors).

作者: chiuchiu 時間: 2008-7-13 10:54
標題: 回復 1# 的帖子
A B C 1/12 4WD 平路啊!廿多年前

[ 本帖最後由 chiuchiu 於 2008-7-13 11:03 編輯 ]

作者: BUNNYYUEN 時間: 2008-7-13 11:31
ayk 1:12 4 wd on road

作者: tiger1 時間: 2008-7-13 11:36
I have a YZ834B and also Kawada Wolf, they use the same size chains.

作者: fyin 時間: 2008-7-14 18:24
Might be 834B use thin gain and tubro optima use think gain, I think!

作者: tiger1 時間: 2008-7-14 20:14
Minimini:

Is it true? 834B use thin chain and optima is thicker than 834b?

作者: minimini 時間: 2008-7-14 20:28

原帖由 tiger1 於 2008-7-14 20:14 發表

 登錄/註冊後可看大圖

Minimini:

Is it true? 834B use thin chain and optima is thicker than 834b?

yes.......my 834b is using thin chain........

but .......I tried the thin chain in optima's pulley ........still fits.....

作者: tiger1 時間: 2008-7-14 22:00
SO, the thin chain was the 'standard' for 1/12, or 1/10 cars back then. The thick one must be for industrial purposes.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)