RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 7.5R Brushless Gear Ratio [打印本頁]

作者: yokomo 時間: 2008-6-25 21:23
標題: 7.5R Brushless Gear Ratio
Do U know the suitable Gear Ratio for 7.5R Brushless Motor?

Thanks All !!

[ 本帖最後由 Ken 於 2008-6-25 22:13 編輯 ]

作者: 馮馮ymc 時間: 2008-6-25 22:20
Try is the best!!!
Ask is for fun

作者: yokomo 時間: 2008-6-25 23:42
Actually, I don't have any idea.

Do u have any suggestion?

作者: kin1611 時間: 2008-6-26 01:03

原帖由 yokomo 於 2008-6-25 21:23 發表

 登錄/註冊後可看大圖

Do U know the suitable Gear Ratio for 7.5R Brushless Motor?
Thanks All !!

５、５無問題

作者: 馮馮ymc 時間: 2008-6-26 01:25

原帖由 yokomo 於 2008-6-25 23:42 發表

 登錄/註冊後可看大圖

Actually, I don't have any idea.

Do u have any suggestion?

由7.5/1開始,快盡就減,遲盡咪加,.....5.5玩11.5R差唔多

作者: cat01 時間: 2008-6-26 10:00
look through the LRP web site, they have a reference gearing chart in some of there ESC or motor specs. But each brand of motors has different gearing so you will still need to try.

If your motor temperature after one run is below 70 degrees C should be safe (or 71 to 79 degrees on Novak site) if temp above these you have over gear.

http://www.lrp.cc/fileadmin/lrp_ ... x11-e-061123-fv.pdf
http://www.teamnovak.com/downloa ... b_lipoprogsheet.pdf

作者: yokomo 時間: 2008-6-26 12:09
Actually, I got one pcs Orion 7.5R but cannot find the proper gear ratio from Orion...

Anyway, thanks all & I will try....

作者: ccc_78 時間: 2008-6-26 18:12

原帖由 yokomo 於 2008-6-26 12:09 PM 發表

 登錄/註冊後可看大圖

Actually, I got one pcs Orion 7.5R but cannot find the proper gear ratio from Orion...

Anyway, thanks all & I will try....

my fd using orion 7.5r for ta-05r, around 6.95

作者: yokomo 時間: 2008-6-27 13:59
ccc_78,
Thanks a lot.... hope to try with U guys.

作者: ccc_78 時間: 2008-6-27 14:07

原帖由 yokomo 於 2008-6-27 01:59 PM 發表

 登錄/註冊後可看大圖

ccc_78,
Thanks a lot.... hope to try with U guys.

好呀, 你幾時會去呀
成日落雨, 好手癢......

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)