RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Tamiya TLU 02 lighting unit [打印本頁]

作者: ryancmlam    時間: 2008-6-14 14:55
標題: Tamiya TLU 02 lighting unit
Who are using this lighting unit (togather with TLU01) ? I got a very bad experience last night. My brend new TLU02 failed last night after the car ran 4-5 laps (~$65 per lap, $298/4.5). The failure of this unit had led the car became out of response and looked like the receiver failed (no steering and forward/backward).

I have checked the PCB of my poor TLU02 and found that seveal paths in the PCB were broken which looked like a result of short-circuit happened inside. I don't know whether it was a result of clashing.

Any brother got similar poor expeirence before? What should I do now, buy a new TLU02 or the 3racing LED set ?

[ 本帖最後由 ryancmlam 於 2008-6-14 14:57 編輯 ]
作者: 觀星是答案    時間: 2008-6-14 15:17
掂過水通電會氧化得好快
會唔會係 hi 到雨水再玩搞成 o甘 ?
作者: ryancmlam    時間: 2008-6-14 15:33
No ah. Very dry. It was brend new. Don't know what happened.
作者: 觀星是答案    時間: 2008-6-14 15:48
原帖由 ryancmlam 於 2008-6-14 15:33 發表
No ah. Very dry. It was brend new. Don't know what happened.

影張相上來睇下個 circuit 邊度斷 o左線 ?
作者: ryancmlam    時間: 2008-6-14 16:12
I have tried to connect the broken paths but the unit stil doesn't work. Any idea. In order to avoid the ASIC (?) be damaged by the heat, I used a 30W solidering iron.

作者: 觀星是答案    時間: 2008-6-14 16:22
你用 contact cleaner 噴乾淨塊 PCB 先搞會好 o的
作者: ice1234    時間: 2008-6-14 17:07
原帖由 ryancmlam 於 2008-6-14 04:12 PM 發表
I have tried to connect the broken paths but the unit stil doesn't work. Any idea. In order to avoid the ASIC (?) be damaged by the heat, I used a 30W solidering iron.

整乾淨塊 PCB 再用銀線駁返佢...或者重用到

PS:嘩tamiya set燈用粒mcu好似係renesas粒h8來 ...有d大才小用

[ 本帖最後由 ice1234 於 2008-6-14 17:08 編輯 ]
作者: ryancmlam    時間: 2008-6-14 18:16
原帖由 ice1234 於 2008-6-14 17:07 發表

整乾淨塊 PCB 再用銀線駁返佢...或者重用到

PS:嘩tamiya set燈用粒mcu好似係renesas粒h8來 ...有d大才小用


...有d大才小用? Nothing I can't say. Even Tamiya uses the space shuttle component, it is meaningless, it failed
作者: Mysterio_chan    時間: 2008-6-15 11:50
之前試過啦我...
無啦啦玩左10分鐘都唔夠.燒q左...始終都唔知發生咩事
作者: ryancmlam    時間: 2008-6-18 23:57
So poor, I finally bought a new TLU02, another $300.....
作者: nskfag    時間: 2008-6-20 01:32
標題: FAG
真的很好,我?你兄弟.
我???,我使? ?
?口?承 SKF?承 FAG?承 NSK?承 timken?承

                               
登錄/註冊後可看大圖

作者: ryancmlam    時間: 2008-6-21 09:47
Shxt, !@$#%@#$^%@%$^#%&^#$&#%&

My new TLU02 failed last night after running for 1.5 packs of battery. Don't know what's wrong.

Who have any idea?
作者: agentjerry    時間: 2008-6-21 10:02
標題: 回復 12# 的帖子
Ryan Hing,

so sorry!
Total loss 2 times ? =6XX




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2