RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: TL01 改M 車一問 [打印本頁]

作者: kaho0338 時間: 2008-6-6 15:59
標題: TL01 改M 車一問
請問TL01 可否換M03臂,c座,轉向杯及狗骨....令佢變成166mm 闊?
因為原有TL01闊為192mm, m03 為166mm

[ 本帖最後由 kaho0338 於 2008-6-6 16:02 編輯 ]

作者: li5115 時間: 2008-6-6 16:38

原帖由 kaho0338 於 2008-6-6 15:59 發表

 登錄/註冊後可看大圖

請問TL01 可否換M03臂,c座,轉向杯及狗骨....令佢變成166mm 闊?
因為原有TL01闊為192mm, m03 為166mm

Yes. What about the wheelbase of the classis?

作者: deadmatch 時間: 2008-6-6 17:08
i have tried once to change TL01 to m cars
you have to buy the A-arms of M03 and 4 dog bones of M03,
Also, you need to " Cut" the Chassis in order to shorten the wheelbase to 210 or 225mm.
If bro you need, i can upload the photo tonight.

作者: kaho0338 時間: 2008-6-6 18:31
thanks all brother ~
i will keep the wheelbase to 257mm, i just want to make the car width at 166mm, because i have a off road body need this special wheelbase and width

hi, deadmatch
is it only change the arm and dog bone only ? any more ? thanks

作者: deadmatch 時間: 2008-6-6 18:34
nothing except arm and dog bone will need if you just change the width only.
Maybe all you need is shortly (50mm or shorter) oil shock.......

作者: kaho0338 時間: 2008-6-6 18:35

原帖由 deadmatch 於 2008-6-6 18:34 發表

 登錄/註冊後可看大圖

nothing except arm and dog bone will need if you just change the width only.
Maybe all you need is shortly (50mm or shorter) oil shock.......

can u share some photo for me as a ref ?
thanks very much ~

[ 本帖最後由 kaho0338 於 2008-6-6 18:37 編輯 ]

作者: deadmatch 時間: 2008-6-6 18:56
Ok, when i back home, i will take some photo for your reference.

作者: kaho0338 時間: 2008-6-6 19:03

原帖由 deadmatch 於 2008-6-6 18:56 發表

 登錄/註冊後可看大圖

Ok, when i back home, i will take some photo for your reference.

thanks brother

作者: deadmatch 時間: 2008-6-6 19:04
i am just a kid(teenager) only, it is my honor that i can help you..

作者: deadmatch 時間: 2008-6-6 23:50
sorry bro that my camera has no battery after taking the tlt photo. i will update the m car photo tomorrow

作者: kaho0338 時間: 2008-6-7 13:48

原帖由 deadmatch 於 2008-6-6 23:50 發表

 登錄/註冊後可看大圖

sorry bro that my camera has no battery after taking the tlt photo. i will update the m car photo tomorrow

thanks very much bro

作者: deadmatch 時間: 2008-6-7 14:23
see your post, you want to make a land crusier by using TL01 Chassis? Interesting

作者: kaho0338 時間: 2008-6-7 14:31

原帖由 deadmatch 於 2008-6-7 14:23 發表

 登錄/註冊後可看大圖

see your post, you want to make a land crusier by using TL01 Chassis? Interesting

yes...with F350 wheel
i think i can make one like this:

登錄/註冊後可看大圖

作者: deadmatch 時間: 2008-6-7 14:38
Fun, i will make a M03 too .

作者: move7648 時間: 2008-6-7 16:29

原帖由 deadmatch 於 2008-6-7 02:38 PM 發表

 登錄/註冊後可看大圖

Fun, i will make a M03 too .

原帖由 deadmatch 於 2008-6-6 05:08 PM 發表

 登錄/註冊後可看大圖

i have tried once to change TL01 to m cars
you have to buy the A-arms of M03 and 4 dog bones of M03,
Also, you need to " Cut" the Chassis in order to shorten the wheelbase to 210 or 225mm.
If bro y ...

Hi Bro~
Still waiting for photo for reference ar!?

作者: deadmatch 時間: 2008-6-7 18:23
sorry that i haven't come home yet.
i will upload them once i get home XD

作者: kaho0338 時間: 2008-6-7 23:08
now with TL01 wheelbase, M03 arm set and 5mm wheel wider ..

the next step is add F350 tire and finish the body

[ 本帖最後由 kaho0338 於 2008-6-7 23:18 編輯 ]

作者: deadmatch 時間: 2008-6-7 23:28
PHOTO UPDATED
SORRY ABOUT THAT SO SLOW

作者: deadmatch 時間: 2008-6-7 23:29
架land cruiser 好正

作者: move7648 時間: 2008-6-8 00:30

原帖由 kaho0338 於 2008-6-7 11:08 PM 發表

 登錄/註冊後可看大圖

now with TL01 wheelbase, M03 arm set and 5mm wheel wider ..

the next step is add F350 tire and finish the body

唔....
有機會4個轆會刮到車殼....
要再升高

作者: kaho0338 時間: 2008-6-8 00:32

原帖由 move7648 於 2008-6-8 00:30 發表

 登錄/註冊後可看大圖

唔....
有機會4個轆會刮到車殼....
要再升高

都未攪好.....到時用f350 軚....個殼重會高好好好多
做到好似圖2今...

[ 本帖最後由 kaho0338 於 2008-6-8 00:34 編輯 ]

作者: kaho0338 時間: 2008-6-8 00:34

原帖由 deadmatch 於 2008-6-7 23:28 發表

 登錄/註冊後可看大圖

PHOTO UPDATED
SORRY ABOUT THAT SO SLOW

thanks it's nice....
i will finish my land cruiser 40 project in this few weeks

作者: move7648 時間: 2008-6-8 00:36

原帖由 kaho0338 於 2008-6-8 12:32 AM 發表

 登錄/註冊後可看大圖

都未攪好.....到時用f350 軚....個殼重會高好好好多
做到好似圖2今...

Good!
will run offroad or onroad?
please don't put it as display ar!

作者: move7648 時間: 2008-6-8 00:37
bro haho0338 : can u also show me the "5mm wheel wider"??
thanks

作者: kaho0338 時間: 2008-6-8 00:37

原帖由 move7648 於 2008-6-8 00:36 發表

 登錄/註冊後可看大圖

Good!
will run offroad or onroad?
please don't put it as display ar!

好似cc01 今.....去行泥地, off road 一番

作者: kaho0338 時間: 2008-6-8 00:40

原帖由 move7648 於 2008-6-8 00:37 發表

 登錄/註冊後可看大圖

bro haho0338 : can u also show me the "5mm wheel wider"??
thanks

個5mm wider 係跟set 軨ga.... 係set 軨專用既.. 其他係用唔到的

E 一套f350軨:

http://www.rcmart.com/catalog/pr ... p;products_id=25567

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)