RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 3r 車高一問 [打印本頁]

作者: valklai 時間: 2008-5-21 10:19
標題: 3r 車高一問
各位跑街會set幾高??頭尾camber,toe-in/out??
入場會set幾高??頭尾camber,toe-in/out??
thx!!!!

作者: stanley_wwy 時間: 2008-5-21 11:48
標題: 回復 1# 的帖子
follow the standard setting from the manual....it's already quite good for most conditions.

it runs okay with the standard setting in ACO and PYC.

but for sure you need to make minor adjustments to suit your driving style

one thing is you may decrease the rear toe-in to like 1-1.5 degree to reduce the oversteer.

camber......just observe the tyres after running and adjust

hope these help.

[ 本帖最後由 stanley_wwy 於 2008-5-21 11:49 編輯 ]

作者: valklai 時間: 2008-5-21 12:15

原帖由 stanley_wwy 於 2008-5-21 11:48 發表

 登錄/註冊後可看大圖

follow the standard setting from the manual....it's already quite good for most conditions.

it runs okay with the standard setting in ACO and PYC.

but for sure you need to make minor adjustments ...

Brother,
In fact, i can't find out which page is show those setting.
Can u tell me which pages is indicate that standard set-up??

作者: Fluke 時間: 2008-5-21 13:46

原帖由 stanley_wwy 於 2008-5-21 11:48 發表

 登錄/註冊後可看大圖

follow the standard setting from the manual....it's already quite good for most conditions.

it runs okay with the standard setting in ACO and PYC.

but for sure you need to make minor adjustments ...

"you may decrease the rear toe-in to like 1-1.5 degree to reduce the oversteer"
The situation should be at the opposite side,decrease rear toe-in , more chance to increase oversteer.

作者: stanley_wwy 時間: 2008-5-21 16:25

原帖由 Fluke 於 2008-5-21 13:46 發表

 登錄/註冊後可看大圖

"you may decrease the rear toe-in to like 1-1.5 degree to reduce the oversteer"
The situation should be at the opposite side,decrease rear toe-in , more chance to increase oversteer.

oh...yea....thanks for pointing out...

I intented to mean decrease understeer.....coz RRR standard setting uses same hardness for front tires and rear tires (37/37), not like other cars using using 38F/40R.

[ 本帖最後由 stanley_wwy 於 2008-5-21 16:55 編輯 ]

作者: stanley_wwy 時間: 2008-5-21 16:27

原帖由 valklai 於 2008-5-21 12:15 發表

 登錄/註冊後可看大圖

Brother,
In fact, i can't find out which page is show those setting.
Can u tell me which pages is indicate that standard set-up??

try this

http://www.kyosho.com/eng/suppor ... ten_vone_index.html

作者: Fluke 時間: 2008-5-21 22:18

原帖由 stanley_wwy 於 2008-5-21 16:25 發表

 登錄/註冊後可看大圖

oh...yea....thanks for pointing out...

I intented to mean decrease understeer.....coz RRR standard setting uses same hardness for front tires and rear tires (37/37), not like other cars using u ...

作者: valklai 時間: 2008-5-22 09:23
thanks all brother!!!

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)