RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Atomic Motor 一問 [打印本頁]

作者: kaka820 時間: 2008-5-20 01:12
標題: Atomic Motor 一問
想請問大家

..........本人車子底板 MR-02 chassis is enhanced with the RA-4B FET motor control amp........可否用Atomic 出品既STOCK R Evolution Motor

??因為見到話[...Basic Requirement: MOSFET 3010 x 2 / (1 layer)...].....咁可唔可以用呢

唔該幫幫忙

作者: 800mah 時間: 2008-5-20 01:34
你呢塊板剛剛符合最低要求, 不過呢隻摩打都幾貴wor, 有無需要呢?

作者: icky 時間: 2008-5-20 02:17
i think can't use , need modif fet
STOCK la, safe cheap fast ha ha

作者: nottoobad 時間: 2008-5-20 07:07
嘩，你去咗火星呀

？今晚唔見你出現就燒咗你個locker!

作者: GTRTam 時間: 2008-5-20 13:06
Okay ga wor. Mine is also 3010 one layer & using Stock R. RA-4B FET should be same as AD or 2.4GHz 3010 FETs.

作者: kaka820 時間: 2008-5-20 14:26
thx.......each brother.......

作者: 800mah 時間: 2008-5-20 15:20

原帖由 GTRTam 於 2008-5-20 13:06 發表

 登錄/註冊後可看大圖

Okay ga wor. Mine is also 3010 one layer & using Stock R. RA-4B FET should be same as AD or 2.4GHz 3010 FETs.

2.4Gs have two layrs of 3010 FETs, they have FETs on both sides of the board ga

作者: GTRTam 時間: 2008-5-21 03:05
Yes so how about RA-4B PCB ? Only have 2 X 3010 ?

作者: kaka820 時間: 2008-5-21 09:36
標題: RA-4B PCB
RA-4B PCB.......is already Only have 2 X 3010

作者: 800mah 時間: 2008-5-21 16:35

原帖由 kaka820 於 2008-5-21 09:36 發表

 登錄/註冊後可看大圖

RA-4B PCB.......is already Only have 2 X 3010

2 x 3010 = one layer
4 x 3010 = two layers

作者: Ang 時間: 2008-5-23 17:19

2.4Gs have two layrs of 3010 FETs, they have FETs on both sides of the board

Ah, already stacked FETS 2x. Very good.

作者: rcplayer 時間: 2008-5-28 22:14

原帖由 icky 於 2008-5-20 02:17 發表

 登錄/註冊後可看大圖

i think can't use , need modif fet
STOCK la, safe cheap fast ha ha

how much the stock motor???

作者: Molala2 時間: 2008-5-29 11:14

原帖由 rcplayer 於 2008-5-28 22:14 發表

 登錄/註冊後可看大圖

how much the stock motor???

ATOMIC BALL BEARING STOCK 130咁上下啦

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)