標題: 如何換09 engine front bearing? [打印本頁] 作者: billlkyy 時間: 2008-4-17 00:29 標題: 如何換09 engine front bearing? 個step係點?毛蟲入手........作者: kennyckl2007 時間: 2008-4-17 01:13
Use the oven, sacrifice the bearing with the shield. Put the new bearings in the freezer. Set the oven for 350-400 and let it heat up for about 10-15 minutes. Take it out with an oven mit and lightly tap the case on a block of soft wood. They should fall out. Meanwhile the new bearings should be almost frozen now in the freezer. They will fall into the case with it being hot and the new bearings cold. let it sit and get to room temperature.
Yes, you may hammer it out from the crankcase. However, there's a high risk of damaging a new bearing while hammer it into the crankcase.作者: billlkyy 時間: 2008-4-18 02:52
換左啦.....thanks作者: chrishkyung 時間: 2008-4-21 18:14
how could u to remove the front bearing
what tool u used to
why u can remove the front bearing without removal of the rear bearing作者: billlkyy 時間: 2008-4-23 14:42
到最後都係用火加熱先得...........作者: kennyckl2007 時間: 2008-4-23 16:33
This is a theory of Expansion and Contraction. Heat and cold make metals expand and contract.