RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 邊到有"架生" 買 ? [打印本頁]

作者: rk2 時間: 2008-2-22 10:07
標題: 邊到有"架生" 買 ?
邊到有"架生" 買 ? 想用電批換車轆螺絲帽 (7mm), 另一邊接電批 1/4" 頭.....
次次用轆匙, 隻手好痛 !!

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: orange00 時間: 2008-2-22 10:12
鴨街有la.

作者: rk2 時間: 2008-2-22 10:19
試過鴨記, 都搵唔到

作者: stanley_wwy 時間: 2008-2-22 12:01
標題: 回復 3# 的帖子
買支7mm 批好過啦.....

幾十蚊.

一係再慳皮d....搵支鐵支仔, 穿住十字匙黎擰都得.

電批大力又驚收爆, 細力你又要自已番手, 箋攪.

[ 本帖最後由 stanley_wwy 於 2008-2-22 12:03 編輯 ]

作者: AMAT 時間: 2008-2-22 12:03
呢支批.....夠唔夠力呀......
我早排買咗支.....差唔多V數....最後都換鬼咗......

作者: chrishkyung 時間: 2008-2-22 12:03
electric tools are not suitable to rc models...except those heavy duty models...

too easy to damage the screws..or plastic parts

作者: AMAT 時間: 2008-2-22 12:03

原帖由 chrishkyung 於 2008-2-22 12:03 發表

 登錄/註冊後可看大圖

electric tools are not suitable to rc models...except those heavy duty models...

too easy to damage the screws..or plastic parts

有得較力度O既......

作者: chrishkyung 時間: 2008-2-22 12:06
ar u sure? I also have this tool but I can sure to say that no torque is adjustable for this tool

作者: rk2 時間: 2008-2-22 12:10
I use this electric tool to un-do tighten screws......
If I need to tighten screws, I will use this tool in the beginning and leave the final tightening done by hand because I do not want to 滑牙, 收爆膠. ......

作者: rk2 時間: 2008-2-22 12:12

原帖由 chrishkyung 於 2008-2-22 12:06 發表

 登錄/註冊後可看大圖

ar u sure? I also have this tool but I can sure to say that no torque is adjustable for this tool

Black & decker had a better version of this tool , with torque adjustment. Price not much difference but release a year later than this version la.

作者: rk2 時間: 2008-2-22 12:14

原帖由 stanley_wwy 於 2008-2-22 12:01 發表

 登錄/註冊後可看大圖

買支7mm 批好過啦..... 幾十蚊.

一係再慳皮d....搵支鐵支仔, 穿住十字匙黎擰都得.

電批大力又驚收爆, 細力你又要自已番手, 箋攪.

搵支鐵支仔 - 覺得庥煩d 囉, 有時我都會咁做的.
買支7mm 批好過啦 - - 就係賴, 唔想用手囉.

作者: AMAT 時間: 2008-2-22 12:15

原帖由 chrishkyung 於 2008-2-22 12:06 發表

 登錄/註冊後可看大圖

ar u sure? I also have this tool but I can sure to say that no torque is adjustable for this tool

我話有部份可以調整力度.....唔係講呢隻......
我支BOSCH都有得調......

作者: chrishkyung 時間: 2008-2-22 14:01
ic......
but anyway, it is better to tighten screws by hand....more accurate

[ 本帖最後由 chrishkyung 於 2008-2-22 14:05 編輯 ]

作者: chacha 時間: 2008-2-22 22:53
換呔都厭麻煩同哂力

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)