RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: a very nice hilux [打印本頁]

作者: buggy 時間: 2007-12-22 00:03
標題: a very nice hilux
a very nice hilux does not necessarily need 2.2" wheel....

作者: lai 時間: 2007-12-22 00:09
簡單得黎都好正

作者: buggy 時間: 2007-12-22 00:13
Its scale is quite realistic. ref site: http://tamiyaclub.com/showroom_model.asp?cid=68942&id=15376

作者: 光丑猶仗凡 時間: 2007-12-22 00:14
wo ~好像真wor

作者: edison 時間: 2007-12-22 00:25
but, the tire and rim is also expensive:
Tire: http://rc4wdstore.com/product_in ... amp;products_id=677
Rim: http://rc4wdstore.com/product_in ... amp;products_id=731
Shock: http://rc4wdstore.com/product_in ... amp;products_id=719
Total USD 220 without shipping!

作者: txzmxn 時間: 2007-12-22 00:42
有個問題...想問吓, 2.2 scale 同1.9 是點計o家? (請恕我無知

)

作者: Ang 時間: 2007-12-22 01:18
Agree

A very good looking Toyota truck; just like the one in your own garage. There is even rust and weather mark on the roll bar & bumpers, so real

And the authentic looking orange paint job...wow...good work!

作者: edison 時間: 2007-12-22 10:20

原帖由 txzmxn 於 2007-12-22 00:42 發表

 登錄/註冊後可看大圖

有個問題...想問吓, 2.2 scale 同1.9 是點計o家? (請恕我無知 )

2.2 and 1.9 is mean the rim diameter, 2.2inch and 1.9inch.

作者: txzmxn 時間: 2007-12-22 13:15

原帖由 edison 於 2007-12-22 10:20 AM 發表

 登錄/註冊後可看大圖

2.2 and 1.9 is mean the rim diameter, 2.2inch and 1.9inch.

O ic thx alot!

作者: chrishkyung 時間: 2007-12-22 13:22
excellent photo, excellent model

作者: monkichi0210 時間: 2007-12-22 13:23

原帖由 edison 於 2007-12-22 00:25 發表

 登錄/註冊後可看大圖

but, the tire and rim is also expensive:
Tire: http://rc4wdstore.com/product_in ... amp;products_id=677
Rim: http://rc4wdstore.com/product_in ... amp;products_id=731
Shock: http://rc4 ...

hahaha....我响tamiyaclb都睇過呢個post.....呢位brother好似話2.2吋的呔軨唔合比例......所以用左星星hummer軨+唔知咩呔.....應該唔係你講果set........
see:
http://www.tamiyaclub.com/showro ... =68942&id=15376

作者: hkBuggyboy 時間: 2007-12-23 13:14
好正

I want to buy one

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)