RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Hara - Hammer 12 conversion kit [打印本頁]

作者: kawada 時間: 2006-3-23 13:02
標題: Hara - Hammer 12 conversion kit
Donno its performance.. but with pretty nice design ....

登錄/註冊後可看大圖

作者: jas 時間: 2006-3-23 15:15
How much for this conversion kit?

作者: 天照 時間: 2006-3-23 15:22
咁耐先出?同之前果架有咩分別?
要用乜車嚟改?用YOKOMO車改!?!!?

作者: dieung 時間: 2006-3-23 15:32
就是以前的那个...

作者: kawada 時間: 2006-3-23 15:35

原帖由天照於 2006-3-23 15:22 發表
咁耐先出?同之前果架有咩分別?
要用乜車嚟改?用YOKOMO車改!?!!?

Yes .. same kit .. can convert both Yokomo & L4 ..

作者: 天照 時間: 2006-3-23 15:42

原帖由 kawada 於 2006-3-23 15:35 發表

Yes .. same kit .. can convert both Yokomo & L4 ..

我一直都以為係用返HPI車改添......競然係用返亞蘇士.......

作者: James 時間: 2006-3-23 16:36
why dont u go for CRC?....no parts for hammer man.....

作者: kawada 時間: 2006-3-23 17:03

原帖由 James 於 2006-3-23 16:36 發表
why dont u go for CRC?....no parts for hammer man.....

yeah .. understood ah .. but this kit is pretty cheap mar .. in case anything breaks .. i will convert the entire kit back to L4 ..

作者: AE111 時間: 2006-3-24 20:39

原帖由 kawada 於 2006-3-23 17:03 發表

yeah .. understood ah .. but this kit is pretty cheap mar .. in case anything breaks .. i will convert the entire kit back to L4 ..

ammmm....ammmmm....... clever!..hahaha..

作者: kawada 時間: 2006-3-24 21:06

原帖由 AE111 於 2006-3-24 20:39 發表

ammmm....ammmmm....... clever!..hahaha..

貢系 lar.. Follow gor Bun Lun so long wor .. learn a bit clever from u mar ...

作者: James 時間: 2006-3-25 02:08

原帖由 kawada 於 2006-3-23 17:03 發表

yeah .. understood ah .. but this kit is pretty cheap mar .. in case anything breaks .. i will convert the entire kit back to L4 ..

ic....not a bad idea!!!! but 700 could get a second hand CRC 3.2.... (i just bought one...haha)

作者: AE111 時間: 2006-3-25 02:36

原帖由 James 於 2006-3-25 02:08 發表

ic....not a bad idea!!!! but 700 could get a second hand CRC 3.2.... (i just bought one...haha)

Quick....quick....photos...photos... see..se..

...also ur 12L4 ah..james. pls to our forum.

作者: James 時間: 2006-3-25 03:48

原帖由 AE111 於 2006-3-25 02:36 發表

Quick....quick....photos...photos... see..se.....also ur 12L4 ah..james. pls to our forum.

alright...will upload soon

作者: kawada 時間: 2006-3-25 09:07
Hor hor .. so jack so ah ?? u may sell ur CRC to me law .. hor hor hor

[ 本帖最後由 kawada 於 2006-3-25 09:09 編輯 ]

作者: James 時間: 2006-3-25 18:24

原帖由 kawada 於 2006-3-25 09:07 發表
Hor hor .. so jack so ah ?? u may sell ur CRC to me law .. hor hor hor

ok lar....jack so....lol

the car is in really good condition...

作者: kawada 時間: 2006-3-25 19:24

原帖由 James 於 2006-3-25 18:24 發表

ok lar....jack so....lol

the car is in really good condition...

Sell it to me sell it to me ..

作者: James 時間: 2006-3-25 20:07

原帖由 kawada 於 2006-3-25 19:24 發表

Sell it to me sell it to me ..

devil...........

no lar...if i buy it then i will play lar......

作者: bun 時間: 2006-3-26 00:56

原帖由 James 於 2006-3-25 02:08 發表

ic....not a bad idea!!!! but 700 could get a second hand CRC 3.2.... (i just bought one...haha)

U said right but also a second hand ,......right

作者: James 時間: 2006-3-26 02:25

原帖由 bun 於 2006-3-26 00:56 發表

U said right but also a second hand ,......right

dont understand

作者: kawada 時間: 2006-4-5 23:46
Hara Portion finished

作者: kawada 時間: 2006-4-6 23:13
Chassis done L4 + Hara + Xenon

作者: kawada 時間: 2006-4-12 00:26
Done

作者: binary 時間: 2006-4-12 09:01

原帖由 kawada 於 2006-4-12 00:26 發表
Done

架車好靚仔！

請問圖中是什麼 servo?

作者: kawada 時間: 2006-4-12 09:22

原帖由 binary 於 2006-4-12 09:01 發表

架車好靚仔！

請問圖中是什麼 servo?

Only 9602 lai kar jar ..

作者: binary 時間: 2006-4-12 09:27

原帖由 kawada 於 2006-4-12 09:22 發表

Only 9602 lai kar jar ..

How much is it?

其實 12 仔係咪一定要用 mini servo? 不能用 1/10 car 既 normal servo e.g. 3003, 9550 etc etc....?

Thanks.

作者: kawada 時間: 2006-4-12 12:17

原帖由 binary 於 2006-4-12 09:27 發表

How much is it?

其實 12 仔係咪一定要用 mini servo? 不能用 1/10 car 既 normal servo e.g. 3003, 9550 etc etc....?

Thanks.

since its not digital . cant use on HRS .. pls aware.. its cost around 350 - 380 at KWS .. u may use large servos but required to mod ( drill holes ) on the main chassis which personally not recommended

[ 本帖最後由 kawada 於 2006-4-12 12:19 編輯 ]

作者: binary 時間: 2006-4-12 12:26

原帖由 kawada 於 2006-4-12 12:17 發表

since its not digital . cant use on HRS .. pls aware.. its cost around 350 - 380 at KWS .. u may use large servos but required to mod ( drill holes ) on the main chassis which personally not reco ...

Yes I know that it's an analog servo, thanks for your reminder.

Oh.... need to drill holes..... too hard to me....

BTW, have you try a servo brand called "Blue Bird"? The price is much cheaper than Futaba.....

作者: kawada 時間: 2006-4-12 13:10

原帖由 binary 於 2006-4-12 12:26 發表

Yes I know that it's an analog servo, thanks for your reminder.
Oh.... need to drill holes..... too hard to me....

BTW, have you try a servo brand called "Blue Bird ...

Sorry no... only got either KO or Futaba ..

作者: binary 時間: 2006-4-12 13:49

原帖由 kawada 於 2006-4-12 13:10 發表

Sorry no... only got either KO or Futaba ..

Never mind. Thanks for your suggestions.

作者: kawada 時間: 2006-4-12 15:10
Body works done .. nothing special ..

作者: binary 時間: 2006-4-12 16:01

原帖由 kawada 於 2006-4-12 15:10 發表
Body works done .. nothing special ..

型！

請問呢個榖幾銀？

作者: kawada 時間: 2006-4-12 16:29

原帖由 binary 於 2006-4-12 16:01 發表

型！
請問呢個榖幾銀？

作者: binary 時間: 2006-4-12 16:46

原帖由 kawada 於 2006-4-12 16:29 發表

80

Thanks. 都唔算貴喎！哈！

作者: kawada 時間: 2006-4-12 22:40
Change my mind lar .. Use Brushless instead ..

作者: 1982zxl 時間: 2006-6-26 22:03
好靓啊！！！请问有没有买回来就是这样的车架啊？
大概几钱？

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)