RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 想請問...linear & pulse 放電不同之處？ [打印本頁]

作者: SpidermanRC 時間: 2007-11-2 00:10
標題: 想請問...linear & pulse 放電不同之處？
when & why using linear & pulse??

THX all brothers!!

作者: 小KiT仔 時間: 2007-11-2 00:19
When:
Use Pulse 30A to discharge the battery to 0.9-1.0V first
then Linear discharge (equalize) to 0.6-0.7V , then immediately charge it again

Why:
Pulse for better and faster discharging , and linear for equalizing the voltage before charging it again

作者: batcat 時間: 2007-11-2 00:25
Good to know this! Thanks.

[ 本帖最後由 batcat 於 2007-11-2 00:27 編輯 ]

作者: SpidermanRC 時間: 2007-11-2 00:40
Thx for the simple & clear advise

Do you know Trinity DPD can do that??

作者: 小KiT仔 時間: 2007-11-2 00:47

原帖由 SpidermanRC 於 2007-11-1 08:40 發表

 登錄/註冊後可看大圖

Thx for the simple & clear advise
Do you know Trinity DPD can do that??

From the site
"Discharges and conditions 4 or 6 cell side by side packs. Discharges 4 or 6 cell stick packs with external leads. 30 A Dyna Pulse™ discharge. 5 A linear discharge. Adjustable: Cut off voltage, Number of cells, 4 or 6 cell internal, 4 to 9 cell external, Pulse or linear discharge, Internal or external charging modes. Displays individual cell and total pack results, discharge time, average voltage, internal resistance, mAh. Superior battery clamping system for positive contact. No power supply needed; runs off AA batteries."

So yes, it can

作者: gabe 時間: 2007-11-2 10:46
wa tks so much
good info

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)