RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Question about 海綿呔 ??? [打印本頁]

作者: Eric_116 時間: 2007-10-24 02:06
標題: Question about 海綿呔 ???
I want to buy the 海綿呔 for MTX-4 but they have 35,38,40 and 43. I don't know what's the different and which one will work for MTX4 front and rear 呔 can anyone help me ar. Thank you

[ 本帖最後由 Eric_116 於 2007-10-24 02:27 編輯 ]

作者: Administrator 時間: 2007-10-24 02:31
as far as i know, the only thing you need to concern is that you get the front tire and the rear tire correctly. (Rear tire had a wider tread).
The numbers are there to indicate the hardness of the tire. 35 is the softest on the list, and higher number tires are harder tire. (Now, the correct tire for your car will depend on a lot of factors. If you are loaded, you should get all of them

)

Hope that helps

作者: stanley_wwy 時間: 2007-10-24 08:06
標題: 回復 1# 的帖子
number 細就林d但咬d, number 大就硬d但冇咁咬.

你可以睇睇架車張setup sheet 建議你用幾多度呔, 我唔係玩mtx, 所以唔清楚.

同埋好睇你架車點set, 同自己o既渣法.

如果係aco 玩....我見唔少mtx 用頭38尾40....你可以試一套先, 唔啱咪下套轉吓.

35/40, 38/43 都有人用, 其他組合鍾意咪試下囉.

希望幫倒你.

[ 本帖最後由 stanley_wwy 於 2007-10-24 08:09 編輯 ]

作者: yman 時間: 2007-10-24 08:10
標題: 回復 3# 的帖子
ACO 37/40, PYC 35/37

作者: stanley_wwy 時間: 2007-10-24 08:13
標題: 回復 3# 的帖子
呀, 係喎....同埋唔同brand o既呔d number 會有唔同...見倒yman 兄個post 先醒起

我用豹仔就 35,38,40,43 咁上...

作者: Eric_116 時間: 2007-10-24 12:16

原帖由 stanley_wwy 於 2007-10-24 08:06 AM 發表 <a href="http://bbs.rc-evo.com/redirect.php?goto=findpost&pid=618404&ptid=60083" target="_blank"><img src="http://bbs.rc-evo.com/images/common/back.gif" border="0" alt="" /></a> 
number 細就林d但咬d, number 大就硬d但冇咁咬. 
 
你可以睇睇架車張setup sheet 建議你用幾多度呔, 我唔係玩mtx, 所以唔清楚. 
 
同埋好睇你架車點set, 同自己o既渣法. 
 
如果係aco 玩....我見唔少mtx 用頭38尾40. ...

Thanks for your help

作者: Eric_116 時間: 2007-10-24 12:16

原帖由 Administrator 於 2007-10-24 02:31 AM 發表 <a href="http://bbs.rc-evo.com/redirect.php?goto=findpost&pid=618352&ptid=60083" target="_blank"><img src="http://bbs.rc-evo.com/images/common/back.gif" border="0" alt="" /></a> 
as far as i know, the only thing you need to concern is that you get the front tire and the rear tire correctly. (Rear tire had a wider tread). 
The numbers are there to indicate the hardness of the ...

Thanks for your help

作者: AMAT 時間: 2007-10-24 12:22
個林巴係指條呔硬度

作者: kambox808 時間: 2007-11-5 23:00
標題: 回復 1# 的帖子
唔洗用今多號碼四條都用38或40你可以買8條交換試下先,再調較油壓筒.

作者: Eric_116 時間: 2007-11-6 01:12

原帖由 kambox808 於 2007-11-5 11:00 PM 發表 <a href="http://bbs.rc-evo.com/redirect.php?goto=findpost&pid=631001&ptid=60083" target="_blank"><img src="http://bbs.rc-evo.com/images/common/back.gif" border="0" alt="" /></a> 
唔洗用今多號碼四條都用38或40你可以買8條交換試下先,再調較油壓筒.

Thanks for your information

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)