RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 新手? 嗯.. 新手重玩 .. 需要大家指點^^ [打印本頁]

作者: 小KiT仔 時間: 2007-10-23 13:34
標題: 新手? 嗯.. 新手重玩 .. 需要大家指點^^
我諗我放低冇玩... 3-4年la..
之前渣係渣xpress pro(應該冇記錯個名吧..=.=) , 但o個時都玩得唔叻..
同埋好多點去set車改車冇去深究...

3年後的今天.. 突然好想玩番..其實由細到大都好中2 車..
賽kart仔 , sim racing , driving school 我乜都o岩..
客套話唔講了.. 想問下宜家入手應該點玩番? 我會玩電車..環保d :p
以前3 , 4年前..tamiya 好似係ta04 (冇記錯吧@@).. 但好多人渣 h?i (死啦..忘哂d名..)
我應該點樣玩番..

btw: 我宜家係seattle 的 , 因為我係呢邊讀書..
買都應該會上網買...anyway.. 希望大家協助.. 我會係呢度同大家交流^^
呢邊搵到d好靚的track.. 所以玩o既地方唔係問題..

作者: rogershark 時間: 2007-10-23 13:57
標題: 回復 1# 的帖子
你就好啦, 香港搵條track都要去新界!!
依家d車易set 又好跑, 睇0下想點玩同預算幾多錢!!
仲多0左好多歐洲車種選擇, 真係講唔晒!!

就返你地方, 可以試 asso. tc-5, 起碼容易搵parts!!

作者: 小KiT仔 時間: 2007-10-23 14:16
其實我會偏番向 ta05? 或者?
to be honest.. 我會係認真去玩的.. 亦都想有部落得下場 ( 自己慢慢改..)
呢邊我research過.. 多數係indoor carpet 的 track..

作者: Brushless 時間: 2007-10-23 19:26

原帖由 rogershark 於 2007-10-23 13:57 發表

 登錄/註冊後可看大圖

你就好啦, 香港搵條track都要去新界!!
依家d車易set 又好跑, 睇0下想點玩同預算幾多錢!!
仲多0左好多歐洲車種選擇, 真係講唔晒!!

就返你地方, 可以試 asso. tc-5, 起碼容易搵parts!!

shark兄，kit仔佢去果邊D carpet場玩，可能仲遠過我這個香港東人去元朗

作者: 小KiT仔 時間: 2007-10-24 08:57
brushless 兄.. 都係渣45 分鐘車咁上下la .. 算近架la

作者: loman 時間: 2007-10-24 11:41
TC5真係唔錯, 或者就黎出既Xray 2008 version

作者: 小KiT仔 時間: 2007-10-24 12:15
已經買左好多野..

TA05 /w options

登錄/註冊後可看大圖

Futaba 3PK Radio Control /w receiver
Futaba 9550 servo
Novak Cyclone TC electric speed control, with heat sink and cap
Tamiya Stock 27T motor (for 27T indoor race here.. maybe switch to brushless later..need to practice first)
A pre-painted R34 Xanavi Tamiya body
Muchmore charger

呢d 除左個body同埋motor , 全部都係used.. 但condition好好
我仲諗緊買咩batteries..呢邊d人推介ib 4200.. 我以前玩時係用sanyo 3000..
太耐冇玩la.. 想問下大家點睇?
同埋係咪basically 我已經齊料玩? 除左batteries外?
大家點睇呢set野同埋配答 , 俾d 意見kit , 唔駛怕critize的^^ 我要的係中肯意見..
不過bear in mind , 我只係returnee.. 太耐冇玩 , 唔想一下子買哂d高檔野 , 咩415 等等 , 我控唔掂 :p

我呢邊個carpet場 :

登錄/註冊後可看大圖

呢度d 地膽玩o既車, 我唔認得 , 係呢邊d人同我講:
Tamiya TA05
Tamiya 415
Xray T2
Xray T2 007
Associated TC5
Losi JRXS
Corally RDX

: 登錄/註冊後可看大圖

作者: loman 時間: 2007-10-24 12:20
條track好tight喎, 係咪玩Foam呔

[ 本帖最後由 loman 於 2007-10-24 12:21 編輯 ]

作者: 小KiT仔 時間: 2007-10-24 12:37
有foam 有唔foam

呢邊d人玩的motor

Tamiya 540 silver can, ROAR 27t stock, ROAR 19t modified, and brushless 13.5 or 10.5.

作者: 小KiT仔 時間: 2007-10-25 19:29

原帖由 小KiT仔 於 2007-10-23 20:15 發表

 登錄/註冊後可看大圖

已經買左好多野..

TA05 /w options

登錄/註冊後可看大圖

Futaba 3PK Radio Control /w receiver
Futaba 9550 servo
Novak Cyclone TC electric speed control, with heat s ...

冇人理...頂頂先^^

作者: 小KiT仔 時間: 2007-10-26 11:47
死啦...中毒太深
呢兩日又買番好多野

novak 13.5 brushless motor and speedo w/sinistered rotor
Muchmore Cell master
Power supply
Pulsar Competition 2
Carbon Fibre Pit-board
Muchmore cooler fans stand

作者: doooouglas 時間: 2007-10-26 11:49

原帖由 小KiT仔 於 2007-10-26 11:47 發表

 登錄/註冊後可看大圖

死啦...中毒太深
呢兩日又買番好多野

novak 13.5 brushless motor and speedo w/sinistered rotor
Muchmore Cell master
Power supply
Pulsar Competition 2
Carbon Fibre Pit-board
Muchmore cooler fans ...

wakakaka....解左少少毒...hehe

作者: doooouglas 時間: 2007-10-26 11:50
電器齊左, 遲少少到常用工具....再下一步....連唔常用工具都會買埋....i mean 靚野

作者: Brushless 時間: 2007-10-26 12:02
以前喺觀唐某工業大厦內都有條carpet場，可惜一早摺咗，記得每次玩完都成狗骨同成輪毛

作者: Brushless 時間: 2007-10-26 12:04
提意把电變放返係後面

仲有個扇咁放好似冇咩用喎，可參考amat兄放法。

[ 本帖最後由 Brushless 於 2007-10-26 12:14 編輯 ]

: 登錄/註冊後可看大圖

作者: 小KiT仔 時間: 2007-10-26 14:49
謝謝brushless..
later 個 novak brushless motor黎左整個d 電子野先先裝^^ 第一次玩brushless..
以前都冇呢樣野.. 其實有冇咩要注意或者渣落有咩分別架?

dooooooooouglas..
澳門人^^?

作者: Brushless 時間: 2007-10-26 15:21
Ha ha, is it the Novak XBR + 13.5R?

If yes, and if you still want to put the ESC at the back, the first thing you have to do is to trim the chassis to make room for the placement of the ESC, the rest you can feel by yourself

作者: ALEXANDER 時間: 2007-10-26 15:23

原帖由 小KiT仔 於 2007-10-24 12:15 PM 發表

 登錄/註冊後可看大圖

已經買左好多野..

TA05 /w options

登錄/註冊後可看大圖

Futaba 3PK Radio Control /w receiver
Futaba 9550 servo
Novak Cyclone TC electric speed control, with heat s ...

呢到玩12女正呀~冇人玩12女!?

作者: doooouglas 時間: 2007-10-26 16:05

原帖由 小KiT仔 於 2007-10-26 14:49 發表

 登錄/註冊後可看大圖

謝謝brushless..
later 個 novak brushless motor黎左整個d 電子野先先裝^^ 第一次玩brushless..
以前都冇呢樣野.. 其實有冇咩要注意或者渣落有咩分別架?

dooooooooouglas..
澳門人^^?

yes ah~~
我套ss5800都未落地就比我擺到神神地...hehe

brushless要注意用較高的齒比, 說明書...好似話...當你11.5r咁計, brush 23t 細齒用20齒的話 , brushless最好用少2~3齒, 即17~18齒較合適

[ 本帖最後由 doooouglas 於 2007-10-26 16:08 編輯 ]

作者: 小KiT仔 時間: 2007-10-26 16:34

原帖由 Brushless 於 2007-10-25 23:21 發表

 登錄/註冊後可看大圖

Ha ha, is it the Novak XBR + 13.5R?

If yes, and if you still want to put the ESC at the back, the first thing you have to do is to trim the chassis to make room for the placement of the ESC, the re ...

... seems like there is something i need to experience wor..kaka
anyway.. is that better for weight balance?

作者: 小KiT仔 時間: 2007-10-26 16:35

原帖由 ALEXANDER 於 2007-10-25 23:23 發表

 登錄/註冊後可看大圖

呢到玩12女正呀~冇人玩12女!?

冇人玩12女..有人玩18女

痴線架...brushless 18 女...快到嘔

作者: 小KiT仔 時間: 2007-10-26 16:36

原帖由 doooouglas 於 2007-10-26 00:05 發表

 登錄/註冊後可看大圖

yes ah~~
我套ss5800都未落地就比我擺到神神地...hehe

brushless要注意用較高的齒比, 說明書...好似話...當你11.5r咁計, brush 23t 細齒用20齒的話 , brushless最好用少2~3齒, 即17~18齒較合適

有機會番黎同你玩下la
你有冇賽?

高d gear ratio唔怕熱ma? 不過好似聽講我個係sintered.. 應該唔會overheat...

作者: doooouglas 時間: 2007-10-26 16:42
e~~你都係澳門嗎? 幾時返黎澳門啊??
高齒比冇咁熱...(唔通我將高低調轉左)?!

新手...未賽過

作者: 小KiT仔 時間: 2007-10-26 17:32

原帖由 doooouglas 於 2007-10-26 00:42 發表

 登錄/註冊後可看大圖

e~~你都係澳門嗎? 幾時返黎澳門啊??
高齒比冇咁熱...(唔通我將高低調轉左)?!

新手...未賽過

我聖誕會番黎渡假...有機會一聚吧
我都係新手 , 幾年前玩的已經全忘了..
何況宜家仲有太多新技術..咩brushless , lipo等等

死啦 , 可能係我把高低倒轉左..

作者: Brushless 時間: 2007-10-26 17:40

原帖由 小KiT仔 於 2007-10-26 16:34 發表

 登錄/註冊後可看大圖

... seems like there is something i need to experience wor..kaka
anyway.. is that better for weight balance?

is for lower CG and better ventilation.

if I were you, I'll try 6.3 gear ratio for the 13.5R first, then go lower for increased speed if necessary. beware of ESC overheat if you go too low, say 5.8 gear ratio.

作者: doooouglas 時間: 2007-10-26 17:41
技術新唔係問題....我新牌仔至係問題麻...
聖誕...good time~~!!!

作者: Brushless 時間: 2007-10-26 17:48
you may feel less punch after you switch to brushless at the very beginning, but longer run time, more important, brushless is maintainance free, motor seldom overheats, but ESC can, so you may consider to put you fan over the ESC instead

作者: 小KiT仔 時間: 2007-10-26 22:15

原帖由 Brushless 於 2007-10-26 01:40 發表

 登錄/註冊後可看大圖

is for lower CG and better ventilation.

if I were you, I'll try 6.3 gear ratio for the 13.5R first, then go lower for increased speed if necessary. beware of ESC overheat if you go too low, say 5 ...

Thanks for the information. I heard that the brushless motors have more torque than the traditional ones...
I think I don't need too low gear ratio as the indoor carpet racetrack doesn't have much space for you to get full throlette.

作者: 小KiT仔 時間: 2007-10-26 22:15

原帖由 doooouglas 於 2007-10-26 01:41 發表

 登錄/註冊後可看大圖

技術新唔係問題....我新牌仔至係問題麻...
聖誕...good time~~!!!

我都變左新牌la..

作者: 小KiT仔 時間: 2007-10-26 22:18

原帖由 Brushless 於 2007-10-26 01:48 發表

 登錄/註冊後可看大圖

you may feel less punch after you switch to brushless at the very beginning, but longer run time, more important, brushless is maintainance free, motor seldom overheats, but ESC can, so you may consid ...

wow.. im am so looking forward to get used to it

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)