RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 求好心人幫幫新手....唔識裝d配件 [打印本頁]

作者: bosco2814    時間: 2007-9-21 22:26
標題: 求好心人幫幫新手....唔識裝d配件
F1應該要改d乜?!

如果想落場跑,最少要改乜?

仲想問,去邊間有多d f1零件?

http://www.atomicmods.com/Products/Atomic-Mini-Z-F1-Aluminum-0%c2%b0-Camber-Steering-Knuckle__11004.aspx

我買左呢個轉向杯,但冇彈弓,KWS又唔見有,唉,,,最衰係我整個陣整甩左個原裝彈弓,而加唔知點算...

http://www.atomicmods.com/Products/Atomic-Mini-Z-F1-Ball-Differential-with-Titanium-Shaft__11029.aspx

買埋呢個珠差,但又唔識點樣裝入去,兩邊都唔識拆...

如果可以指點下我,,,,請add我[email protected] (我唔知呢到留唔留得msn呢)

[ 本帖最後由 bosco2814 於 2007-9-23 00:40 編輯 ]
作者: 偉記    時間: 2007-9-22 02:48
標題: 回復 1# 的帖子
頭轆換彈弓,鋼kingpin,最好有金屬轉向杯,30度呔
尾加頂撐,炭摟板,金屬散熱,珠差,10度呔
最好用kyosho零件
去食粥模型問下先,
作者: 偉記    時間: 2007-9-22 02:59
講漏左,最好換埋AD板,
作者: bosco2814    時間: 2007-9-22 09:07
原帖由 偉記 於 2007-9-22 02:59 發表
講漏左,最好換埋AD板,


換ad 板好貴,加FET有咩用?
作者: kawada    時間: 2007-9-22 10:28
For your reference.. come and join us ... ^^

1. Kyosho option damper
2. lower suspension graphite plates
3. option damper springs set
4. Kyosho ball diff set
5. Kyosho Ti shaft for F1
6. Alu steering hub
7. ATM F1 tires
8. ATM alu front rigid steering rod holder
9. Kyosho front spring set for 02
10. Kyosho Xspeed  ( fet is not required since xspeed with its stock AM PCB or AD PCB already got reasonable speed for CT - Wider track that can accommodate F1 )
11. Suspension plate spring set
12. Kyosho Ti King Pin


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


                               
登錄/註冊後可看大圖


[ 本帖最後由 kawada 於 2007-9-22 11:28 編輯 ]
作者: bosco2814    時間: 2007-9-22 19:45
我買左個atomic 珠差,,,,

但唔識裝,,,兩邊都裝好左...點拆出黎放入去?
作者: bosco2814    時間: 2007-9-23 23:27
搵人教下我點裝個珠差啦,我唔識整呀
作者: karl    時間: 2007-10-2 13:10
果日行開一陣翻黎吾見左你的,部F1 係咪OK 啦
作者: bosco2814    時間: 2007-10-2 13:39
原帖由 karl 於 2007-10-2 13:10 發表
果日行開一陣翻黎吾見左你的,部F1 係咪OK 啦


部f1 ok la...我都唔想走住,不過新member送2Hrs我玩左2Hrs就走law未,

你地d awd快喇....落去玩又阻住你...又撞爛...

f1係未改極都改唔倒好似你地d awd咁快嫁?
作者: billy86che    時間: 2007-10-2 14:03
原帖由 bosco2814 於 2007-10-2 13:39 發表


部f1 ok la...我都唔想走住,不過新member送2Hrs我玩左2Hrs就走law未,

你地d awd快喇....落去玩又阻住你...又撞爛...

f1係未改極都改唔倒好似你地d awd咁快嫁?


The best, modified F1 is slower than the best, modified MR01, not to mention the MR02 and the AWD.
作者: ttyy    時間: 2007-10-2 14:20
slower...but more realistic!
作者: bosco2814    時間: 2007-10-2 16:43
原帖由 billy86che 於 2007-10-2 14:03 發表


The best, modified F1 is slower than the best, modified MR01, not to mention the MR02 and the AWD.



咁f1都好難係車場生存....要等到到好多人羅住f1....
作者: bosco2814    時間: 2007-10-2 16:44
原帖由 ttyy 於 2007-10-2 14:20 發表
slower...but more realistic!


個d真係快得好誇張......

如果係接近真實...都唔知點解f1 咁鬼慢!
作者: karl    時間: 2007-10-2 19:10
原帖由 bosco2814 於 2007-10-2 16:44 發表


個d真係快得好誇張......

如果係接近真實...都唔知點解f1 咁鬼慢!


你果部F1個磨打係咪原裝架,可以加fet,令部車快D
作者: bosco2814    時間: 2007-10-3 00:18
原帖由 karl 於 2007-10-2 19:10 發表


你果部F1個磨打係咪原裝架,可以加fet,令部車快D


除左轉向杯同珠差,全部都原裝,,,有排換,,,

加fet要幾錢?,,,,睇黎要草一草錢先整得
作者: billy86che    時間: 2007-10-3 10:26
The most important reason why the F1 is slower than the others is it is difficult to improve the rear grip without oil dampers or 'cha cha'. If you add the latter, you might have to remove part of the shell which will damage the look. (Unless you can DIY those dampening devices so small that they can hide inside the body shell)
作者: karl    時間: 2007-10-3 11:50
原帖由 bosco2814 於 2007-10-3 00:18 發表


除左轉向杯同珠差,全部都原裝,,,有排換,,,

加fet要幾錢?,,,,睇黎要草一草錢先整得

你問問偉記啦,去知道的野我我多,可以有D吾洗一定加的
作者: 偉記    時間: 2007-10-3 14:36
標題: 回復 17# 的帖子
梗係問kawada啦,佢架F1又快又好定,
星期六有冇時間上車場?
作者: sumandy    時間: 2007-10-3 14:43
原帖由 偉記 於 2007-10-3 14:36 發表
梗係問kawada啦,佢架F1又快又好定,
星期六有冇時間上車場?

靚仔.. 收PM.. 有野問你呀
作者: karl    時間: 2007-10-4 11:46
原帖由 偉記 於 2007-10-3 14:36 發表
梗係問kawada啦,佢架F1又快又好定,
星期六有冇時間上車場?

咩時間先 ;P
Kawada實話呢樣要改果樣要改,到時買到怕怕

[ 本帖最後由 karl 於 2007-10-4 11:47 編輯 ]
作者: bosco2814    時間: 2007-10-4 13:47
原帖由 karl 於 2007-10-4 11:46 發表

咩時間先 ;P
Kawada實話呢樣要改果樣要改,到時買到怕怕


邊個係Kawada??...
我星期六都上黎玩下~




歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) Powered by Discuz! X3.2