原帖由 smallfaifai 於 2007-9-11 12:50 發表
本來手頭有一架FF02……
110334
見唔係好用得著,諗住不如買少少o野改成m03啦……
110335
點知越買越多……
110336
110337
雖則好多只係必需品,但……結果係荷包再度乾硬化……
原帖由 minimini 於 2007-9-11 17:23 發表
bro fai......I saw you yesterday in RCModxl........buying the Tech A-arms.......![]()
原帖由 觀星是答案 於 2007-9-12 00:29 發表
我將自己架 M03 改 o左 FF02
發現要改 o既 o野都唔算少
1 ) 4 條脾
2 ) 一對狗骨 / 萬向
3 ) 車腰加長件
4 ) 殼柱
5 ) 轉向推桿
6 ) Bumper ....
原帖由 觀星是答案 於 2007-9-12 00:29 發表
我將自己架 M03 改 o左 FF02
發現要改 o既 o野都唔算少
1 ) 4 條脾
2 ) 一對狗骨 / 萬向
3 ) 車腰加長件
4 ) 殼柱
5 ) 轉向推桿
6 ) Bumper ....
原帖由 agentjerry 於 2007-9-16 22:49 發表
very classic and beautiful.
hope to see yr real product in TKO.
how abt the speed after yr test?![]()
原帖由 smallfaifai 於 2007-9-16 22:19 發表
到最後都係玩23T……買左隻V16R ESC,睇下得唔得,最緊要係平同埋有後波嘛,玩TKO rally一流……
總算完工!呢一兩日o係屋企試下車先...........
懶,所以用番之前o既膠油壓……
111330
而隻Yokomo 23T都 ...
原帖由 龍崗小吳 於 2007-9-22 22:39 發表
SORRY!
那是拍照用的,真的玩我也捨不得用。
PO一些之前玩的:
[url=http://tw.video.yahoo.com/video/play?ei=UTF-8&b=5&vid=228109&gid=155983http://tw.video.yahoo.com/video/play?ei=UTF-8&b=5&vid=228109&gid]http://tw.video.yahoo.com/video/play?ei=UTF-8&b=5&vid=228109&gid=155983http://tw.video.yahoo.com/video/play?ei=UTF-8&b=5&vid=228109&gid[/url] ...
原帖由 agentjerry 於 2007-9-23 09:33 發表
i want to know M series RC is front rear?
is it not good for rally?
原帖由 bcgg 於 2007-9-24 15:35 發表
I think Tamiya M series RC is both front and rear....
3 is front and 4 is rear...
3 is good for rally, 4 is not good for rally....
小弟D英文,你明唔明先![]()
原帖由 bcgg 於 2007-9-24 15:35 發表
I think Tamiya M series RC is both front and rear....
3 is front and 4 is rear...
3 is good for rally, 4 is not good for rally....
小弟D英文,你明唔明先![]()
原帖由 li5115 於 2007-9-24 16:47 發表
M-03 for rally is good, we have 5 on run.
Up to this moment, we don't have any brother use M-04 on rally.
Which is good, cannot compare. What about you build one M-04 rally and join us next time?
原帖由 li5115 於 2007-9-24 17:53 發表
We have some brothers from YUEN LONG even TONG CHUNG and we play from 10:00 until 15:00.
There is no excuse you are in Sheung Shui.
歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/) | Powered by Discuz! X3.2 |