RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: bought MB4 already [打印本頁]

作者: rk2 時間: 2007-9-2 19:36
標題: bought MB4 already
Hi brothers, I bought a 2nd hand MB4 yesterday. Got tons of spare parts - include a pair of atomic metal CVD

But the front A arm seems wear so much and need to replaced　－　but no space A arm provided

. Can I change to the better design MB4 truggy front upper and lower arm without any modification ?

The steering seems not so smooth. ..... .. If I use a 3003 servo, it seems that i need to cut the "ear" of the servo, am i correct on this ?

What ESC would suitable ? I thinking about V16 . - ( maybe 2nd hand as well

）Hope to join your party of MB4 soon.

作者: raymen 時間: 2007-9-2 20:17
標題: Cool ~``
Brother don't forget to share the photos ar.....

I'm also using 3003 servo( need to cut Both Ears if not the mini servo ), I'm using MC330CR ESC because I think Forward & Reverse included is necessary for off-road.

But the Length of arms between Buggy and Truggy is the same size. Truggy is longer.

作者: rk2 時間: 2007-9-2 20:56

原帖由 raymen 於 2007-9-2 20:17 發表

 登錄/註冊後可看大圖

Brother don't forget to share the photos ar.....

I'm also using 3003 servo( need to cut Both Ears if not the mini servo ), I'm using MC330CR ESC because I think Forward & Reverse included is ...

thanks raymen ! Maybe I need to go waigo again for the "A" arms. Will post the photo soon

I think you got it right to have forward and reverse ESC !

作者: rk2 時間: 2007-9-4 09:12
bought back the front arm already.

. but no original wheel adaptor available. - my MB4 come with the kyosho 1/18 wheel which use smaller size hexagaon adaptor.

. so at the moment i cannot use the 1/10 wheels.

作者: rk2 時間: 2007-9-12 11:58
a picture to share

, still need a ESC to test the speed

: 登錄/註冊後可看大圖

作者: rk2 時間: 2007-9-12 12:33
PICTURE WITH MINI T

: 登錄/註冊後可看大圖

作者: raymen 時間: 2007-9-12 12:49

原帖由 rk2 於 2007-9-2 07:36 PM 發表

 登錄/註冊後可看大圖

Hi brothers, I bought a 2nd hand MB4 yesterday. Got tons of spare parts - include a pair of atomic metal CVD
But the front A arm seems wear so much and need to replaced　－　but no space A ...

Brother, How much is the pair of Metal CVD of the MB4 Truggy/??? stock available in Waigo now? Thks

作者: rk2 時間: 2007-9-12 13:18

原帖由 raymen 於 2007-9-12 12:49 發表

 登錄/註冊後可看大圖

Brother, How much is the pair of Metal CVD of the MB4 Truggy/??? stock available in Waigo now? Thks

I have an impression of $16x ~ 18x for original Anderson MB4 parts - not sure suitable for truggy or not. Yes,it is available in Waigo. Maybe you can also check here http://www.rcmart.com/catalog/default.php?cPath=144_1036, location in Kwun tong. service is rather good. price will be abit cheaper if you go to their office to pick up.

作者: raymen 時間: 2007-9-12 14:15

原帖由 rk2 於 2007-9-12 01:18 PM 發表

 登錄/註冊後可看大圖

I have an impression of $16x ~ 18x for original Anderson MB4 parts - not sure suitable for truggy or not. Yes,it is available in Waigo. Maybe you can also check here http://www.rcmart.com/catal ...

yes...the service is good... I'm always brought stuffs and parts there...

Only the location is not fit for me..

作者: rk2 時間: 2007-10-4 19:18
ESC is back

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: rk2 時間: 2007-10-4 19:19
but the T- plug is so tight. difficult to un plug everytime.

May change to other plug soon.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)