RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: CNC Mill [打印本頁]

作者: cowcowlee 時間: 2007-7-19 15:19
標題: CNC Mill
http://www.taigtools.com/cmill.html

有無人玩過呢味野???

作者: rk2 時間: 2007-7-19 15:28
咁簡單既 ? 又唔見有 control box ?

點叫 cnc 呀 !

作者: cowcowlee 時間: 2007-7-19 15:46

原帖由 rk2 於 2007-7-19 15:28 發表

 登錄/註冊後可看大圖

咁簡單既 ? 又唔見有 control box ? 點叫 cnc 呀 !

http://www.deepgroove1.com/index.htm

咁會唔會好d呢??

作者: mtu 時間: 2008-3-10 23:51
原來香港都有得買價錢ok平wor
都好多人買
http://hk.myblog.yahoo.com/id196 ... ev=1468&next=-1

作者: buggy 時間: 2008-3-11 10:30
嘩，有了它，自製parts都得。

作者: raybee1211 時間: 2008-3-13 23:58
手動定係電腦set好自動架?成set要幾多錢呢?? for金屬定係膠呢??thx

作者: Molala2 時間: 2008-3-17 02:15

原帖由 kennyckl2007 於 2008-3-16 21:53 發表

 登錄/註冊後可看大圖

May lathe - Emco.151039

CNC? how much?

作者: 藍毛毛 時間: 2008-3-17 02:17
標題: 回復 7# 的帖子
呢部唔平當年$5000左右

作者: mtu 時間: 2008-3-21 10:30
標題: 回復 6# 的帖子
頭先係yahoo 拍賣見到有部$1800但係用起來好似好複雜.............
各位有冇人用開呀?我想試下玩但係又唔識
有冇人可以分享下?

作者: rk2 時間: 2008-3-22 09:29
any link ?

作者: Administrator 時間: 2008-3-22 14:07
the Yahoo link above got another link to a CNC mill forum, there you also can download a "simple" plan for building your own CNC mill!

(If you have the resource and Skill to do it that is....)

作者: barrypops 時間: 2008-5-6 00:48

原帖由 kennyckl2007 於 2008-3-16 21:53 發表

 登錄/註冊後可看大圖

May lathe - Emco.151039

Is it yours ?
Would you kindly tell me where to buy this ?
Thanks so much !

作者: kennyckl2007 時間: 2008-5-6 09:21

原帖由 barrypops 於 2008-5-6 00:48 發表

 登錄/註冊後可看大圖

Is it yours ?
Would you kindly tell me where to buy this ?
Thanks so much !

This is my lathe. Sorry for the typing error. Please see PM. TKs.

作者: cncuser 時間: 2008-10-8 14:48
You can have a look at the following web site

www.cnc4workshop.com

they are a hong kong base company , their 3D-minimill machine had been on the market for over 3 years.

作者: starion 時間: 2008-10-26 22:36

原帖由 cncuser 於 2008-10-8 14:48 發表

 登錄/註冊後可看大圖

You can have a look at the following web site

www.cnc4workshop.com

they are a hong kong base company , their 3D-minimill machine had been on the market for over 3 years.

C Hing, do you know how much is their 3D-minimill? Thanks

作者: cowcowlee 時間: 2008-10-27 12:11
you may take a look...

http://auction1.taobao.com/aucti ... b88def59a34d6.jhtml

作者: cncuser 時間: 2008-11-6 10:14

原帖由 starion 於 2008-10-26 22:36 發表

 登錄/註冊後可看大圖

C Hing, do you know how much is their 3D-minimill? Thanks

The basic machine comes with..
3 X step motor driver
3 X size 42 step motor
1 X 250W power supply
1 X pc interface card for 4 axis
4 X limit and home switch input
1 X 150W spindle
1 X cooling fan
1 X Metal case with room for the A axis
1 X (320mm) linear motion axis with high speed bearing at both end...
1 X (250mm) " "
1 X (150mm) " "
The prices for all of these is HK$8800.00 and the machine is assemble and tested, all
you need is your pc computer with your control software install. If you are
interest you can give them a call and they are happy to give your a demo

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)