RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Landie Defender! [打印本頁]

作者: mikewu 時間: 2007-5-11 17:58
標題: Landie Defender!
After 5 days of hard work and patient.... Now I got to figure out how I mount on the chassis..... Enjoy the photos...........

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: J 時間: 2007-5-11 18:02
叻仔喎

作者: Vinz 時間: 2007-5-11 18:06
Sososososo nice!!

DIY ?

作者: hamilton521 時間: 2007-5-11 18:09
邊道買架?好正喎

作者: Evo露筍 時間: 2007-5-11 18:12
隻殼好靚呀~~係硬膠殼?岩咩車用呀?

作者: mikewu 時間: 2007-5-11 18:14

原帖由 Vinz 於 2007-5-11 18:06 發表
Sososososo nice!!

DIY ?

DIY Paint.....

作者: mikewu 時間: 2007-5-11 18:14

原帖由 hamilton521 於 2007-5-11 18:09 發表
邊道買架?好正喎

Arp Lui Street Chinese Made item..... with cheap cheap chassis...

作者: mikewu 時間: 2007-5-11 18:15

原帖由 Evo露筍 於 2007-5-11 18:12 發表
隻殼好靚呀~~係硬膠殼?岩咩車用呀?

Hard shell... It fits CC01 LWB (CRV) chassis.... I have seen people put them on TLT.. It's all DIY mate...

作者: bcgg 時間: 2007-5-11 18:15

原帖由 Evo露筍 於 2007-5-11 18:12 發表
隻殼好靚呀~~係硬膠殼?岩咩車用呀?

隻殼係大陸"散頭"玩具嚟架...

作者: bcgg 時間: 2007-5-11 18:16

原帖由 mikewu 於 2007-5-11 18:14 發表

Arp Lui Street Chinese Made item..... with cheap cheap chassis...

When you buy this??? Still?

作者: Vinz 時間: 2007-5-11 18:16

原帖由 mikewu 於 2007-5-11 18:14 發表

Arp Lui Street Chinese Made item..... with cheap cheap chassis...

How much is it ?

作者: J 時間: 2007-5-11 18:18

原帖由 Vinz 於 2007-5-11 18:16 發表

How much is it ?

very cheap... but no more stock since last year lu

作者: bcgg 時間: 2007-5-11 18:19
標題: 回復 #11 Vinz 的帖子
I remember around $150~200, can "talk price"

作者: Vinz 時間: 2007-5-11 18:20

-----

作者: mikewu 時間: 2007-5-11 18:23

原帖由 bcgg 於 2007-5-11 18:16 發表

When you buy this??? Still?

A long time ago lu.... Not sure if they still have them out there now...

作者: bcgg 時間: 2007-5-11 18:29
我知大陸D野好小有第二水,不過如果你真係勁鐘意,上東莞行過圈,大把連星星京商都未出
過嘅車都有(HardShell),

作者: mikewu 時間: 2007-5-11 18:30

原帖由 bcgg 於 2007-5-11 18:29 發表
我知大陸D野好小有第二水,不過如果你真係勁鐘意,上東莞行過圈,大把連星星京商都未出
過嘅車都有(HardShell),

Where Where? Where in Dongquang has RC cars??? I know there are plenty of copy CC01 Pajero Hardshell in ShenZhen Lo Wu City only..

作者: bcgg 時間: 2007-5-11 18:46

原帖由 mikewu 於 2007-5-11 18:30 發表

Where Where? Where in Dongquang has RC cars??? I know there are plenty of copy CC01 Pajero Hardshell in ShenZhen Lo Wu City only..

I dont remember exactly the address, but there are a street I saw many store the sell "Copy" version rc vehicles, plane.....
You said those Pajero shell I have two...
And also you may go 廟街, there are three/four 檔口 selling this kind of product

作者: kachunsky 時間: 2007-5-11 18:51

原帖由 bcgg 於 2007-5-11 18:29 發表
我知大陸D野好小有第二水,不過如果你真係勁鐘意,上東莞行過圈,大把連星星京商都未出
過嘅車都有(HardShell),

我住東莞個邊架BO..
東莞邊頭

作者: bcgg 時間: 2007-5-11 18:56

原帖由 kachunsky 於 2007-5-11 18:51 發表

我住東莞個邊架BO..
東莞邊頭

Are you live in Fanling???
你包二奶????

作者: kachunsky 時間: 2007-5-12 00:00

原帖由 bcgg 於 2007-5-11 18:56 發表

Are you live in Fanling???
你包二奶????

唔係...我NEWYEAR 先會返..你明架啦=.=
我無你咁花心...

作者: 宏 時間: 2007-5-17 04:47
幾靚仔喎~~
好想知個車架你會點整...

我果部諗到頭都爆

作者: mikewu 時間: 2007-5-17 16:45

原帖由宏於 2007-5-17 04:47 發表
幾靚仔喎~~
好想知個車架你會點整...
我果部諗到頭都爆

I am thinking to order some body post from CC01 VW and see if it works.... Do you have any other idea??

作者: tt01 時間: 2007-5-17 22:57

原帖由宏於 2007-5-17 04:47 發表
幾靚仔喎~~
好想知個車架你會點整...
我果部諗到頭都爆

正常都係CCO1車架。

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: gibson 時間: 2007-5-18 00:29
Outstanding bor, nice!!!!!

Looks like the HK old police car!!

作者: 宏 時間: 2007-5-18 02:01

原帖由 mikewu 於 2007-5-17 16:45 發表

I am thinking to order some body post from CC01 VW and see if it works.... Do you have any other idea??

正計劃開發前置三速波箱四驅車架....車架已造好
不過仲有好多問題未解決到

作者: chowhungjai 時間: 2007-5-18 11:21
Here is my Land Rover Defender

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: Deemax 時間: 2007-5-18 11:50
好毐既Defender呀........!真係好鬼靚,最衰買唔到...!
想問o下F350轆位o岩唔o岩o架?

作者: 宏 時間: 2007-5-18 22:39

原帖由 Deemax 於 2007-5-18 11:50 發表
好毐既Defender呀........!真係好鬼靚,最衰買唔到...!
想問o下F350轆位o岩唔o岩o架?

得! fit wheelbase的
不過有個問題...車架個波箱會頂車頭....

作者: mikewu 時間: 2007-5-19 18:57

原帖由 chowhungjai 於 2007-5-18 11:21 發表
Here is my Land Rover Defender

Brother chowhunjai.. can you show us how you mount the body onto the chassis? Is it a CC01 chassis you have there?

作者: chowhungjai 時間: 2007-5-19 19:36
hope those photos can help you

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: chowhungjai 時間: 2007-5-19 19:38
Sorry, I forget to post these two!!

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: mikewu 時間: 2007-5-19 19:41
Thanks bro... you are being a big help.....

作者: sIUcHuN 時間: 2007-5-19 20:01
如果加返少少OFFSET(鈴)會更加好.

作者: music8888 時間: 2007-6-5 23:23
標題: 正ar!!
正ar!!

作者: speedstar 時間: 2007-8-5 18:01

原帖由 mikewu 於 2007-5-11 18:23 發表

 登錄/註冊後可看大圖

A long time ago lu.... Not sure if they still have them out there now...

Bro Mike,
I found one in GuangZhou yesterday, RMB150. Since it was too hot & the kit is too big I can only take one to HK.
If you may passby Guangzhou when going to your factory and would like to get one more, please PM me for details.
Next time may need to bring the tools to take out the body shell, actually no need to bring the chasis & rc back HK

作者: jm144 時間: 2007-8-7 20:18
feel so good~

作者: StarFuck 時間: 2007-8-24 09:14
我想要部車後面果部Polini910多D

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)