RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Hummer H2 SUT [打印本頁]

作者: 宏 時間: 2006-2-19 21:04
標題: Hummer H2 SUT
前後加後用左4日先搞掂...要mask既野多到嘔...

噴完都唔太捨得玩~

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

: 登錄/註冊後可看大圖

作者: surfhk 時間: 2006-2-19 21:07
Beautiful!!

作者: J 時間: 2006-2-19 21:28
整得好好~~

配咩車架?

作者: Edde 時間: 2006-2-19 21:29
的確"正"....如果前泵把係銀色就像真

作者: 800mah 時間: 2006-2-19 21:44
nice paint job~~~

but the side mirrows looks strange, haah ~

作者: karhey 時間: 2006-2-19 21:55
wow, nice nice color chose and carefully made!

作者: mikewu 時間: 2006-2-19 22:07
Ding! Got beat by you tim! I bought 2 of these and ready to paint one!
What chassis is it?

作者: Bloodyhell 時間: 2006-2-19 22:22
wow very nice, what chassis?

作者: speedstar 時間: 2006-2-19 22:23
Where to buy this body?

作者: AMAT 時間: 2006-2-19 22:42
哈哈,的確係好難MASK的~!

: 登錄/註冊後可看大圖

作者: 宏 時間: 2006-2-19 22:55
多謝各位讚賞

車架係TA-02
呔就係kyosho rally呔

: 登錄/註冊後可看大圖

作者: 宏 時間: 2006-2-19 22:57

原帖由 speedstar 於 2006-2-19 22:23 發表
Where to buy this body?

個殼o係"紅星"買既....不過暫時冇貨,想買多個做士啤都冇~

作者: coolboy 時間: 2006-2-19 22:59
黑色野性d！

作者: 宏 時間: 2006-2-19 23:10

原帖由 coolboy 於 2006-2-19 22:59 發表
黑色野性d！

唔怪得你今日係咁比人擒．．．哈哈~~~

作者: txzmxn 時間: 2006-2-19 23:45

原帖由宏於 2006-2-19 10:55 PM 發表
多謝各位讚賞
車架係TA-02
呔就係kyosho rally呔

正喎!! 個油壓想不是原裝的嗎? 有幾長?

作者: AMAT 時間: 2006-2-19 23:48
輪距O岩O岩好喎~!掂喎~!

我都要搵返套原裝TA02臂先得~!

作者: J 時間: 2006-2-19 23:54
是260mm軸距嗎? 定係用280mm 版ta02? thx

[ 本帖最後由 J 於 2006-2-19 23:55 編輯 ]

作者: txzmxn 時間: 2006-2-20 00:06
Is it the same??

Proline body shell H2 Hummer SUT for MGT, TNX, LST???

What length? i mean total body length and wheel base

[ 本帖最後由 txzmxn 於 2006-2-20 00:17 編輯 ]

: 登錄/註冊後可看大圖

作者: 宏 時間: 2006-2-20 00:24

原帖由 txzmxn 於 2006-2-20 00:06 發表
Is it the same??

Proline body shell H2 Hummer SUT for MGT, TNX, LST???

That is 1/8 scale,mine is 1/10 scale 190mm size, Wheel Base 260cm

http://www.rcworld.ch/neueprojekte.asp?id=1147

作者: mikewu 時間: 2006-2-20 00:28

原帖由宏於 2006-2-19 22:57 發表

個殼o係"紅星"買既....不過暫時冇貨,想買多個做士啤都冇~

hehehehe.... I have 2.... bought it at the same store... I can sell you one.....

(just kidding) I am thinking to paint one for drifting.. But it's strange for a Hummer drift..... Still thinking.....

作者: txzmxn 時間: 2006-2-20 00:29

原帖由宏於 2006-2-20 12:24 AM 發表

That is 1/8 scale,mine is 1/10 scale 190mm size, Wheel Base 260cm
http://www.rcworld.ch/neueprojekte.asp?id=1147

Thx!! How much $?

Including the rear mirror? (the pic on AMAT's and your link w/o rear mirror)

作者: 宏 時間: 2006-2-20 02:00

原帖由 txzmxn 於 2006-2-20 00:29 發表

Thx!! How much $?

Including the rear mirror? (the pic on AMAT's and your link w/o rear mirror)

紅星$150, 見存就好似有...但要$260

其他地方唔知有冇...

作者: 宏 時間: 2006-2-20 02:01

原帖由 mikewu 於 2006-2-20 00:28 發表

hehehehe.... I have 2.... bought it at the same store... I can sell you one..... (just kidding) I am thinking to paint one for drifting.. But it's strange for a Hummer drift..... Still t ...

哈....唔係far...hummer玩dirft...

真係幾 strange ...

作者: 天照 時間: 2006-2-20 12:39

原帖由 txzmxn 於 2006-2-20 00:29 發表

Thx!! How much $?

Including the rear mirror? (the pic on AMAT's and your link w/o rear mirror)

冇倒後鏡的.

佢好似有出幾個VERSION.
不過呢隻SUT版呢,就係190MM TOURING車架用O既VERSION嚟.

我宜家都打算改佢落TA02到,不過我果個係TA01底,要換臂先用到,唔係輪距唔O岩.

作者: garyleeys 時間: 2006-2-20 17:38
wonderful printing
how much of the ''kyosho rally呔"

作者: txzmxn 時間: 2006-2-20 21:43

原帖由宏於 2006-2-20 02:00 AM 發表

紅星$150, 見存就好似有...但要$260
其他地方唔知有冇...

原帖由天照於 2006-2-20 12:39 PM 發表

冇倒後鏡的.

佢好似有出幾個VERSION.
不過呢隻SUT版呢,就係190MM TOURING車架用O既VERSION嚟.

我宜家都打算改佢落TA02到,不過我果個係TA01底,要換臂先用到,唔係輪距唔O岩.

Thx both!
But how come 宏's rear mirror? buy seperately?

作者: AMAT 時間: 2006-2-20 21:45

原帖由 txzmxn 於 2006-2-20 21:43 發表

Thx both!
But how come 宏's rear mirror? buy seperately?

相信係用舊HUMMER個鏡裝上去~!哈!

作者: 宏 時間: 2006-2-20 23:37

原帖由 AMAT 於 2006-2-20 21:45 發表

相信係用舊HUMMER個鏡裝上去~!哈!

冇錯~

屋企冇啦啦有對舊HUMMER鏡咪裝上去囉~

作者: monkichi0210 時間: 2006-2-21 10:24

原帖由天照於 2006-2-20 12:39 發表

冇倒後鏡的.

佢好似有出幾個VERSION.
不過呢隻SUT版呢,就係190MM TOURING車架用O既VERSION?.

我宜家都打算改佢落TA02到,不過我果個係TA01底,要換臂先用到,唔係輪距唔O岩.

brother...

as i know...the wheelbase of ta01 and ta02 is almost the same......ta02 just move the CG a bit towards the front part....the middle part shorter.....the rear sup. arm point to the rear....so u will see that the rear sup. arm seem in different direction compare with ta01.......as i'm not quite sure the wheelbase of your ta01(the hummer one, right!!??)....maybe it's longer than the standard ta01.....maybe u go and check check la!!

作者: 天照 時間: 2006-2-21 10:39

原帖由 monkichi0210 於 2006-2-21 10:24 發表

brother...

as i know...the wheelbase of ta01 and ta02 is almost the same......ta02 just move the CG a bit towards the front part....the middle part shorter.....the rear sup. arm point to the ...

我果O架車咗囉~!哈!
所以要改~!

作者: mark999hk 時間: 2006-2-21 10:49

原帖由宏於 2006-2-19 09:04 PM 發表
前後加後用左4日先搞掂...要mask既野多到嘔...
噴完都唔太捨得玩~

架車噴得好靚，完完全全沒有"曬"咗個 Shell。越睇越正！

作者: pantherjovi 時間: 2006-2-21 11:43
條呔重有無得買呀??我有架TA01都想.....

作者: Oakfield 時間: 2006-2-21 11:52

原帖由宏於 2006-2-19 21:04 發表
前後加後用左4日先搞掂...要mask既野多到嘔...
噴完都唔太捨得玩~

宏;

Can fit HPI MT-2 (big foot)

, thanks

作者: 宏 時間: 2006-2-21 16:07

原帖由 pantherjovi 於 2006-2-21 11:43 發表
條呔重有無得買呀??我有架TA01都想.....

有...kws有幾間都見到有得賣...

原帖由 Oakfield 於 2006-2-21 11:52 發表

宏;

Can fit HPI MT-2 (big foot), thanks

我唔清楚mt-2個wb係幾多...如果係260mm就fit了~

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)