RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: Porsche Cayenne 200mm [打印本頁]

作者: karhey 時間: 2006-2-18 10:48
標題: Porsche Cayenne 200mm
Hi All,

I would like to share my new shell with you guys

All Comments are wellcome!!!

: 登錄/註冊後可看大圖

作者: J 時間: 2006-2-18 10:59
karhey, 200mm on your TT01? the wheel arches are a bit too wide lei.
wht colour did you use? can't see clearly ar

作者: karhey 時間: 2006-2-18 11:03
its on a ** TG10-Mk2 ....supposed to fit but seems like the rear wheels need bigger offset!!

作者: hc1309 時間: 2006-2-18 11:04

原帖由 karhey 於 02/02/2006 11:03 AM 發表
its on a ** TG10-Mk2 ....supposed to fit but seems like the rear wheels need bigger offset!!

Yea! Its nice, I saw it last night too.
But I would like to know where can I find wheels with offset in HK?

GWS again? I cant see it there.

Please advice

作者: J 時間: 2006-2-18 11:06
o, sorry. then u get a set of offset wheels sin la. perhaps bigger diameter wheels also.
the shell looks quite nice btw.

作者: hamilton521 時間: 2006-2-18 11:24
個車殼好正喎!E個車場好似是灣仔橋底?

作者: 409 時間: 2006-2-18 11:53
WHERE TO BUY THIS BODY? HOW MUCH FOR IT?

作者: python 時間: 2006-2-18 12:14

原帖由 J 於 2006-2-18 11:06 發表
o, sorry. then u get a set of offset wheels sin la. perhaps bigger diameter wheels also.
the shell looks quite nice btw.

Yes, right, I suggest u use pajero's big block wheels, it might look better fit, I saw there have this wheel set sold in "Chong SXng".

作者: karhey 時間: 2006-2-18 12:20
Yea, its in Wan Chai!!!! and thank you for the suggestions! I will try to look for bigger wheels and keep posting the pictures!!!

作者: karhey 時間: 2006-2-18 12:22

原帖由 409 於 2006-2-18 11:53 AM 發表
WHERE TO BUY THIS BODY? HOW MUCH FOR IT?

I got it in KWS and for HK$160.....the shop with many cats

Its by HPI and I think it will fits quite well............test drove it for 1 tank and so far this shell is nice to play with

作者: J 時間: 2006-2-18 12:24
Yes that will look good but...
pajero rim set ho expensive ar...

作者: rc2006 時間: 2006-2-18 13:13
you can buy 1/8 TGX rim & tires and see.

作者: karhey 時間: 2006-2-18 13:13
how much r those pajero rims?!?!

作者: 409 時間: 2006-2-19 21:28

原帖由 karhey 於 2006-2-18 12:22 發表

I got it in KWS and for HK$160.....the shop with many cats

Its by HPI and I think it will fits quite well............test drove it for 1 tank and so far this shell is nice to play wit ...

thank you!

作者: mikewu 時間: 2006-2-19 23:38

原帖由 karhey 於 2006-2-18 13:13 發表
how much r those pajero rims?!?!

If I remember right, $140 for a pair with offroad tires..... They are the original wheels and tires for CC01 hardshell/softshell Pajeros But for track use, I am not sure about those offroad tires bor....

作者: wasino3318 時間: 2006-2-20 00:48
個殼真係几靚喎，成架真車咁。

作者: minimini 時間: 2006-2-20 00:52
another suggestion is the "super ten" size tyres.....

I will definitely buy it if it is 190mm......

作者: surfhk 時間: 2006-2-20 02:53
Is it the HPI shell??

作者: minimini 時間: 2006-2-20 10:01

原帖由 surfhk 於 2006-2-20 02:53 發表
Is it the HPI shell??

yes.....

作者: crazyed30000 時間: 2006-6-14 06:38
Hello karhey ,
Which shop you bought the HPI Cayenne body from ?
Can you tell me the name of the hobby shop ?
I looking for a HPI Cayenne body , But i don't know where have it for sell .
Thanks a lot.

作者: 雷公 時間: 2006-6-14 07:43
我響智樂買HKD198(兩星期前)﹐星期日鴻聲都仲有一隻﹐不過要HKD220﹐搶錢﹐之前KARHEY話響貓鋪度買﹐祗係要HKD160﹐所以我都已經買貴左﹐點知高處未算高。
尋晚終於完成左我個殼﹐落左個好失敗既花﹐完全唔MATCH波子CAYENNE個款﹐望望下仲以為係F360 DAYTONA添﹐好失敗

個頭燈燈箱又係另一失敗之處﹐整到好樣衰﹐個車輪又唔夠OFFSET﹐就算夠OFFSET個車輪跟本太細﹐真係要用TGX鈴先配到﹐可能會買番HPI個套鈴﹐襯好多

登錄/註冊後可看大圖

[ 本帖最後由雷公於 2006-6-14 16:44 編輯 ]

: 登錄/註冊後可看大圖

作者: crazyed30000 時間: 2006-6-14 10:52
This body is for super ten size .

作者: hc1309 時間: 2006-6-14 11:23

原帖由雷公於 2006-6-14 07:43 AM 發表
我響智樂買HKD198(兩星期前)﹐星期日鴻聲都仲有一隻﹐不過要HKD220﹐搶錢﹐之前KARHEY話響貓鋪度買﹐祗係要HKD160﹐所以我都已經買貴左﹐點知高處未算高。
尋晚終於完成左我個殼﹐個花好失敗﹐完全唔MATCH波子CA ...

no one force you to paint that pattern ga wor.

try another better one next time, brother

作者: dimsim8 時間: 2006-6-14 20:26
I have got this body on my TL-01 with the hpi super size rims,

will post my body up later

登錄/註冊後可看大圖

作者: 雷公 時間: 2006-6-14 21:47

原帖由 dimsim8 於 2006-6-14 20:26 發表
I have got this body on my TL-01 with the hpi super size rims,

will post my body up later

登錄/註冊後可看大圖

yeah, try to take more photos for us

作者: dimsim8 時間: 2006-6-15 04:31
條相機cable唔見左,要去買個條

作者: dimsim8 時間: 2006-6-15 04:38
條相機cable唔見左,要去買個條

作者: crazyed30000 時間: 2006-6-18 22:40
Today i go to KWS to find the HPI Cayenne body shell.
But i don't found it.
Any brother can tell me that where is the 貓鋪 ?

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)