RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: 平玩 12GT 英國 Schumacher 碳纖底板 走珠差速 [打印本頁]

作者: jethobby    時間: 2015-9-18 18:55
標題: 平玩 12GT 英國 Schumacher 碳纖底板 走珠差速
本帖最後由 jethobby 於 2015-9-18 19:08 編輯

Schumacher

K154 - SupaStox GT Kit - S1/Diff
K157 - SupaStox GT Kit - C/F





NEW - Lightweight Low Centre of Gravity CNC Alloy Motor Mounts.      NEW - Pivot Ball Rear End with Front to Back Tube Damper for Improved Bump Riding.
NEW - Adjustable Rear Ride Height Via Rear Axle Adjusters.
NEW - Adjustable Front Ride Height on King Pin.
NEW - Rear Tweak and Roll Stiffness Adjustment via springs and spring position.
NEW - Adjustable Rear Droop with droop screws.
NEW - Adjustable Front Droop screws.
NEW - Shorter, Narrower and stiffer 2.5mm Carbon Fibre or 2.5mm S1 Composite Chassis.
NEW - Small Kimbrough Servo Saver with Strengthener Included As Standard for improved Steering Geometry.
NEW - Lightweight Front Foam Bumper and Mounting For Great Protection.
NEW - Included Ball Bearing Front Wheels.
NEW - Tweak Free Battery Mounting with Tape. Option Battery Strap Available.
NEW - CNC Brass Weight Position on Rear Pod for Better Balance.
NEW - Chassis Weight Balance Pivot Holes. For Use With U3582 Pivot Set.
NEW - Adjustable Ackerman with Washers.
NEW - Pivot Front Suspension With Camber, Castor, Droop And Toe-in/out Adjustment.
NEW - Improved Ground Clearance Rear Body Mounting.
NEW - Multiple Servo Mounting Positions.
70T 48 dp High Efficiency Spur as Standard.
Chassis accepts 1S or 2S Shorty.
CNC Alloy Drive Dog Outputs For Precision And Durability.
CNC High Tensile, Stainless Steel Rear Axle.
High Tensile, Stainless Steel Suspension Pivots.
High Tensile Steel Hex Screws Used Throughout.
Adjustable Steering Turnbuckles Included As Standard.
Ball Raced Rear Axle With Rubber Sealed Bearings.
High Quality Easy to Follow Instruction Manual.
Large Range Of Optional 32 and 48dp Spur Gears.
Fully Adjustable Body Mount System.
Contact Pre-glued And Trued Foam Tyres Included,
35sh Rear and 47sh Front.Full Range Of Optional Colour Coded Springs.
Accepts A Huge Range Of Industry Standard Bodyshells, Motors, Batteries, And Speed Controllers.
Torsional Side Damping Adjusted with 'O' Rings or Speed Secret Optional Tube Dampers.




作者: sam    時間: 2015-9-19 10:19
兩款有咩分別?
作者: 空降兵    時間: 2015-9-19 19:02
請問幾$及有义速是邊一個型號。有現貨嗎?。
作者: RCK    時間: 2015-9-19 19:54
几錢??
作者: jethobby    時間: 2015-9-21 14:11
空降兵 發表於 2015-9-19 19:02
請問幾$及有义速是邊一個型號。有現貨嗎?。

For pricing, please click: Schumacher - SupaStox GT Kit

K154 - 纖維底板 + 差速
K157 - 碳纖底板 (差速-optional, 有現貨)

作者: jethobby    時間: 2015-9-21 14:12
sam 發表於 2015-9-19 10:19
兩款有咩分別?

K154 - 纖維底板 + 差速
K157 - 碳纖底板 (差速-optional, 有現貨)

作者: jethobby    時間: 2015-9-21 14:13
RCK 發表於 2015-9-19 19:54
几錢??

For pricing, please click: Schumacher - SupaStox GT Kit

作者: hcchan    時間: 2015-9-26 14:49
請問這車是用什麽呔呢? Thx
作者: littlewolf263    時間: 2015-9-27 00:41

前轆係用公制啤鈴,fit唔到現市場上十二仔前呔鈴,  對嗎?
作者: hcchan    時間: 2015-10-2 17:50
請問有無OPTION ? U4647, U4625 .U3966,U3967 THX
作者: hcchan    時間: 2015-10-2 18:00

                               
登錄/註冊後可看大圖

作者: hcchan    時間: 2015-10-2 18:04
option.jpg
登錄/註冊後可看大圖