RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區

標題: More m03 問題 [打印本頁]

作者: GigaRacer 時間: 2007-2-27 04:10
標題: More m03 問題
M03 is front wheel drive right?

Does it have sealed gearbox?

What's the different between M03 and M03M?

When can we expect M03R?

Thanks Thanks!

作者: kaho0338 時間: 2007-2-27 09:50

原帖由 GigaRacer 於 2007-2-27 04:10 發表
M03 is front wheel drive right?

Does it have sealed gearbox?

What's the different between M03 and M03M?

When can we expect M03R?

Thanks Thanks!

front wheel drive , it have sealed gearbox
M03 wheel base is 210mm....while m03m wheel base is 225mm ( m03m include a new F part, it have 新c 座, 新轉向, 後2度杯, m03m 15mm 加長件)

登錄/註冊後可看大圖

the different of m03 and m03m is just a F part ...

[ 本帖最後由 kaho0338 於 2007-2-27 09:52 編輯 ]

作者: loman 時間: 2007-2-27 09:52
點解你咁鍾意問埋D咁既問題既

作者: GigaRacer 時間: 2007-2-28 01:59
標題: 回復 #3 loman 的帖子
haha, because I mostly play on street, so I concern if the gear box is sealed.

forgive me, I am new to M cars.

more questions:
Front wheel drive is fun?
What kind of body does it come with the M03M?
When will the M03R come out?

[ 本帖最後由 GigaRacer 於 2007-2-27 10:04 編輯 ]

作者: kaho0338 時間: 2007-2-28 02:40
Front wheel drive is fun? <-----u need always change your front tries, after 10-15 rounds

What kind of body does it come with the M03M? <-----swift...it seems no more...

M03R released on march....... nothings special....it just a metal version of m03m, just forget it.....u can buy a m03m and upgrade metal parts, then it will similar to m03r (except: the transparent damper)

作者: GigaRacer 時間: 2007-2-28 04:06
標題: 回復 #5 kaho0338 的帖子
thanks for the info,

so do you suggest M03 or M03M?

作者: kaho0338 時間: 2007-2-28 04:11

原帖由 GigaRacer 於 2007-2-28 04:06 發表
thanks for the info,

so do you suggest M03 or M03M?

m03m of cause.....it is the tamiya latest m03 series.
there are a lot of improve on m03m

[ 本帖最後由 kaho0338 於 2007-2-28 04:13 編輯 ]

作者: GigaRacer 時間: 2007-2-28 04:22
標題: 回復 #7 kaho0338 的帖子
cool, thanks. And I like the suzuki body.

作者: GigaRacer 時間: 2007-3-21 05:03
標題: 回復 #2 kaho0338 的帖子
Does M03 and M03M use the same bearing set?

If I get a M03, and change to M03M F-part, does it fit?

Then, I should order M03M's bearing set, right?

[ 本帖最後由 GigaRacer 於 2007-3-20 13:06 編輯 ]

作者: rctc3rc 時間: 2007-3-21 15:28

原帖由 GigaRacer 於 2007-3-21 05:03 發表
Does M03 and M03M use the same bearing set?

If I get a M03, and change to M03M F-part, does it fit?

Then, I should order M03M's bearing set, right?

新款M03M 果4個轆係轉左用8粒 (細 bearing)!

但個人覺得(細 bearing) 快死過 (大 bearing),
你地有冇咁嘅經驗!

作者: aloha 時間: 2007-3-21 21:53
小弟只玩 m03, m03m 既問題留反其他師兄..
其實, 你一買就買架 m03m 咪得囉. 仲乜要買架 m03改?

玩 ff 車頭太係蝕快d既, 解決辦法咪得閒頭尾掉轉囉...

大細 bearing 死既機會差不多.
細 bearing 快死D 會唔會係因為冇落少少油呢?

作者: GigaRacer 時間: 2007-3-22 04:59
標題: 回復 #11 aloha 的帖子
Bought a M03 yesterday.... still preferred mini-cooper than suzki.

Thank you all for the info.

will get the bearing, upright, and ball diff. Any idea on the body color?

作者: 觀星是答案 時間: 2007-3-24 01:07
其實買架 M03-M 仲好過 M03
M03M 的 design 好過 M03
仲多 o左份伸阻件

你想用 mini Cooper 殼, 可以買架 M03M 返來, 放 o左隻 swift 殼再改返用 Mini Cooper 殼
我依家架 M03 就係 o甘改出來的

登錄/註冊後可看大圖

作者: kaho0338 時間: 2007-3-24 01:18

原帖由 觀星是答案 於 2007-3-24 01:07 發表
其實買架 M03-M 仲好過 M03
M03M 的 design 好過 M03
仲多 o左份伸阻件

你想用 mini Cooper 殼, 可以買架 M03M 返來, 放 o左隻 swift 殼再改返用 Mini Cooper 殼
我依家架 M03 就係 o甘改出來的

http: ...

this is for collection or for running ?

作者: 觀星是答案 時間: 2007-3-24 01:21

原帖由 kaho0338 於 2007-3-24 01:18 發表

this is for collection or for running ?

1 * running (the photo one)
1 * collecting (did not took a photo, but the different are, the collecting one have blue TRF damper + square front bumper)

作者: kaho0338 時間: 2007-3-24 01:22

原帖由 GigaRacer 於 2007-3-22 04:59 發表
Bought a M03 yesterday.... still preferred mini-cooper than suzki. Thank you all for the info.

will get the bearing, upright, and ball diff. Any idea on the body color?

old green mini cooper !

登錄/註冊後可看大圖

作者: 觀星是答案 時間: 2007-3-24 01:25
I prefer ... Red + white instead of dark green + white

作者: kaho0338 時間: 2007-3-24 01:27

登錄/註冊後可看大圖

this is also my fav color too

作者: GigaRacer 時間: 2007-6-11 14:12
Everyone,

Very happy with my M03 at the TCS race today. Thanks for everyone's help of setting it. I was using front blue, rear yellow TRF short spring, Tamiya plastic oil damper, Ball diff, univeral shaft, bearing, 3 degree rear up-right, 60D reinforced slick tires.

Handles really well, just lose on speed..... somehow, some people's white pigs were soooo fast.

歡迎光臨 RC EVOLUTION - 遙控工房 - 香港RC遙控車討論區 (https://www.rc-evo.com/xbbs/)